Publications

Books Edited
1960s
1970s
1980s
1990s
2000s
2010s

F. W. Harris and D. R. Paul, CONTROLLED RELEASE POLYMERIC FORMULATIONS, ACS Symposium Series No. 33, American Chemical Society, Washington, D.C., 1976.
S. Newman and D. R. Paul, POLYMER BLENDS, Vols. I and II, Academic Press, New York, 1978. (translated into Russian and Chinese).
D. W. Fowler and D. R. Paul, POLYMERS IN CONCRETE - Proceedings of 2nd International Congress, The University of Texas, Austin, 1978.
D. R. Paul, SORPTION AND TRANSPORT IN GLASSY POLYMERS, published as Polymer Topics: Parts I and II in Polym. Eng. Sci., 20 (1 and 4), 1980.
F. E. Karasz, E. Martuscelli, and R. Palumbo, and D. R. Paul, INTERNATIONAL SYMPOSIUM ON PHASE RELATIONSHIPS AND PROPERTIES OF MULTICOMPONENT POLYMER SYSTEMS - Anacapri, 1983, published as Polymer Topics in Polym. Eng. Sci., 24 (8), 1984.
L. H. Sperling and D. R. Paul, MULTICOMPONENT POLYMER MATERIALS, Advances in Chemistry Series No. 211, American Chemical Society, Washington, D.C., 1986.
Y. P. Yampol’skii and D. R. Paul, POLYMERIC GAS SEPARATION MEMBRANES, CRC Press, Boca Raton, 1994.
C.B. Bucknall and D. R. Paul, POLYMER BLENDS: FORMULATION AND PERFORMANCE, Volumes 1 and 2, John Wiley and Sons, New York, 2000. (translated into Chinese)

D. R. Paul, “Membrane Separation of Gases Using Steady Cyclic Operation,” Ind. Eng. and Chem.-Proc. Des. and Devel., 10, 375 (1971).
D. R. Paul, V. Mavichak, and D. R. Kemp, “Diffusion in Concentrated Polystyrene Solutions,” J. Appl. Polym. Sci., 15, 1553 (1971).
D. R. Paul and O. M. Ebra-Lima, “The Mechanism of Liquid Transport through Swollen Polymer Membranes,” J. of Appl. Polym. Sci., 15, 2199 (1971).
D. R. Paul, “The Role of Membrane Pressure in Reverse Osmosis,” J. Appl. Polym. Sci., 16, 771 (1972).
D. R. Paul, C. E. Vinson, and C. E. Locke, “The Potential for Reuse of Plastics Recovered from Solid Wastes,” Polym. Eng. Sci., 12, 157 (1972).
D. R. Paul, “Reuse of Plastics Recovered from Solid Waste,” SPE Chicago RETEC Technical Papers, 4 (1972).
D. R. Paul and A. A. Armstrong, “The Elastic Stresses Generated During Fiber Formation by Wet-Spinning,” J. Appl. Polym. Sci., 17, 1269 (1973).
D. R. Paul and D. R. Kemp, “The Diffusive Time Lag in Polymer Membranes Containing Adsorptive Fillers,” J. Polym. Sci., 41C, 79 (1973).
D. R. Paul and D. H. Carranza, “Pressure-Induced Diffusion in Swollen Butyl Rubber Membranes,” J. Polym. Sci., 41C, 69 (1973).
D. R. Paul, “Relation Between Hydraulic Permeability and Diffusion in Homogeneous Swollen Membranes,” J. Polym. Sci. Polym: Phys. Ed., 11, 289 (1973).
D. R. Paul, C. E. Locke, and C. E. Vinson, “Chlorinated Polyethylene Modification of Blends Derived from Waste Plastics. Part I: Mechanical Behavior,” Polym. Eng. Sci., 13, 202 (1973).
C. E. Locke and D. R. Paul, “Chlorinated Polyethylene Modification of Blends Derived from Waste Plastics. Part II: Mechanism of Modification,” Polym. Eng. Sci., 13, 308 (1973).
D. R. Paul, D. W. Fowler, and J. T. Houston, “Polymerization of Methyl Methacrylate by Catalyzed Peroxide Decomposition Without Applied Heat,” J. Appl. Polym. Sci., 17, 2771 (1973).
D. W. Fowler, J. T. Houston, and D. R. Paul, “Polymer-Impregnated Concrete Surface Treatments for Highway Bridge Decks," in "Polymers in Concrete,” A.C.I. Special Publication SP-40, pp. 93-117, American Concrete Institute, Detroit (1973).
R. E. Robertson and D. R. Paul, “Stress-Strain Behavior of Polyolefin Blends,” J. Appl. Polym. Sci., 17, 2579 (1973).
C. E. Locke and D. R. Paul, “Graft Copolymer Modification of Polyethylene-Polystyrene Blends: I. Graft Preparation and Characterization,” J. Appl. Polym. Sci., 17, 2597 (1973).
C. E. Locke and D. R. Paul, “Graft Copolymer Modification of Polyethylene-Polystyrene Blends: II. Properties of Modified Blends,” J. Appl. Polym. Sci., 17, 2791 (1973).
D. R. Kemp and D. R. Paul, “Gas Sorption in Polymer Membranes Containing Adsorptive Fillers,” J. Polym. Sci.: Phys. Edition, 12, 485 (1974).
D. R. Paul, “Solvent Effects on Mutual Diffusion in Concentrated Polystyrene Solutions,” J. Appl. Polym. Sci., 18, 473 (1974).
A. L. McPeters and D. R. Paul, “Stresses and Molecular Orientation Generated During Wet Spinning of Acrylic Fibers,” Appl. Polym. Symp., 25, 159 (1974).
J. H. Southern and D. R. Paul, “Elastic Fracture of Polystyrene Solutions,” Polym. Eng. Sci., 14, 560 (1974).
D. R. Paul, “Diffusive Transport in Swollen Polymer Membranes,” in “Permeability of Plastic Films and Coatings to Gases, Vapors, and Liquids,” Edited by H. B. Hopfenberg, Plenum Pub., New York, p. 35 (1974).
D. R. Paul, “Further Comments on the Relation Between Hydraulic Permeation and Diffusion,” J. Polym. Sci.: Polym. Phys. Ed., 12, 1221 (1974).
D. R. Paul and D. W. Fowler, “Surface Impregnation of Concrete Bridge Decks with Polymers,” J. Appl. Polym. Sci., 19, 281 (1975).
D. R. Paul and J. O. Altamirano, “Properties of Compatible Blends of Poly(vinylidene fluoride) and Poly(methyl methacrylate),” Advances in Chemistry Series, Vol. 142, ACS, Washington, D.C., 371 (1975).
O. M. Ebra-Lima and D. R. Paul, “Hydraulic Permeation of Liquids through Swollen Polymeric Networks: I. Poly(vinyl Alcohol)-Water,” J. Appl. Polym. Sci., 19, 1381 (1975).
D. R. Paul, J. D. Paciotti, and O. M. Ebra-Lima, “Hydraulic Permeation of Liquids Through Swollen Polymeric Networks: II. Liquid Mixtures,” J. Appl. Polym. Sci., 19, 1837 (1975).
D. R. Paul and O. M. Ebra-Lima, “Hydraulic Permeation of Liquids through Swollen Polymeric Networks: III. A Generalized Correlation,” J. Appl. Polym. Sci., 19, 2759 (1975).
D. R. Paul and J. D. Paciotti, “Driving Force for Hydraulic and Pervaporative Transport in Homogeneous Membranes,” J. Polym. Sci.: Polym. Phys. Ed., 13, 1201 (1975).
D. W. Fowler and D. R. Paul, “Partial Polymer-Impregnation of Highway Bridge Decks,” Polymer Concrete, Transportation Research Record, 542, 9 (1975).
D. R. Paul and J. H. Southern, “The Role of Entanglements in the Elastic Fracture of Polymer Solutions,” J. Appl. Polym. Sci., 19, 3375 (1975).
D. R. Paul, M. Garcin, and W. E. Garmon, “Solute Diffusion Through Swollen Polymer Membranes,” J. Appl. Polym. Sci., 20, 609 (1976).
D. R. Paul and S. K. McSpadden, “Diffusional Release of a Solute from a Polymer Matrix,” J. Membrane Sci., 1, 33 (1976).
D. R. Paul and W. J. Koros, “Effect of Partially Immobilizing Sorption on Permeability and the Diffusion Time Lag,” J. Polym. Sci.: Polym. Phys. Ed., 14, 675 (1976).
W. J. Koros, D. R. Paul, and A. A. Rocha, “Carbon Dioxide Sorption and Transport in Polycarbonate,” J. Polym. Sci.: Polym. Phys. Ed., 14, 687 (1976).
J. R. Stell, D. R. Paul, and J. W. Barlow, “Mechanical Properties of Oriented Polyethylene/Polystyrene Blends,” Polym. Eng. Sci., 16, 496 (1976).
W. J. Koros and D. R. Paul, “Design Considerations for Measurement of Gas Sorption in Polymers by Pressure Decay,” J. Polym. Sci.: Polym. Phys. Ed., 14, 1903 (1976).
D. R. Paul, “The Solution-Diffusion Model for Swollen Membranes,” Separation and Purification Methods, 5, 33 (1976).
R. L. Imken, D. R. Paul, and J. W. Barlow, “Transition Behavior of Poly(vinylidene Fluoride)/Poly(ethyl Methacrylate) Blends,” Polym. Eng. Sci., 16, 593 (1976).
D. R. Paul, “Polymers in Controlled Release Technology,” in Controlled Release Polymeric Formulations, D. R. Paul and F. W. Harris, Eds., ACS Symposium Series, 33, 1 (1976).
D. R. Paul, Review of book: P. Meares, ed., “Membrane Separation Processes,” Elsevier, Amsterdam, 1976; in J. Membrane Sci., 2, 391 (1977).
D. R. Paul and A. L. McPeters, “Effect of Spin Orientation on Drawing of Wet-Spun Fibers,” J. Appl. Polym. Sci., 21, 1699 (1977).
W. J. Koros, D. R. Paul, M. Fujii, H. B. Hopfenberg, and V. Stannett, “Effect of Pressure on CO2 Transport in Poly(ethylene Terephthalate),” J. Appl. Polym. Sci., 21, 2899 (1977).
D. R. Paul, J. W. Barlow, C. A. Cruz, R. N. Mohn, T. R. Nassar, and D. C. Wahrmund, “Polyester-Polycarbonate Blends,” ACS Div. of ORPL Preprints, 37, 130 (1977).
R. E. Bernstein, C. A. Cruz, D. R. Paul, and J. W. Barlow, “LCST Behavior in Polymer Blends,” Macromolecules, 10, 681 (1977).
W. J. Koros, A. H. Chan, and D. R. Paul, “Sorption and Transport of Various Gases in Polycarbonate,” J. Membrane Sci., 2, 165 (1977).
D. W. Fowler and D. R. Paul, “Longer Life for an Old Material,” DISCOVERY: Research and Scholarship at The University of Texas, 1, (#3), 20 (1977).
A. H. Chan, W. J. Koros, and D. R. Paul, “Analysis of Hydrocarbon Gas Sorption and Transport in Ethyl Cellulose Using the Dual Sorption/Partial Immobilization Models,” J. Membrane Sci., 3, 117 (1978).
J. H. Southern, R. L. Ballman, J. A. Burroughs, and D. R. Paul, “The Polymer Chain Entanglement Criterion for Elastic Fracture,” J. Polym. Sci.: Polym. Letters Ed., 16, 157 (1978).
W. Wu and D. R. Paul, “Time-Lag Technique of Diffusion-Coefficient Measurement in Solution Spinning,” Tex. Res. J., 48, 230 (1978).
D. C. Wahrmund, R. E. Bernstein, J. W. Barlow, and D. R. Paul, “Polymer Blends Containing Poly(vinylidene fluoride) - Part I: Poly(alkyl acrylates),” Polym. Eng. Sci., 18, 677 (1978).
R. E. Bernstein, D. R. Paul, and J. W. Barlow, “Polymer Blends Containing Poly(vinylidene fluoride) - Part II: Poly(vinyl esters),” Polym. Eng. Sci., 18, 683 (1978).
R. E. Bernstein, D. C. Wahrmund, J. W. Barlow, and D. R. Paul, “Polymer Blends Containing Poly(vinylidene fluoride) - Part III: Polymers Containing Ester, Ketone, or Ether Groups,” Polym. Eng. Sci., 18, 1220 (1978).
D. R. Paul, J. W. Barlow, R. E. Bernstein, and D. C. Wahrmund, “Polymer Blends Containing Poly(vinylidene Fluoride) - Part IV: Thermodynamic Interpretations,” Polym. Eng. Sci., 18, 1225 (1978).
D. W. Fowler, D. R. Paul, and P. Yimprasert, “Corrosion Protection of Reinforcing Provided by Polymer-Impregnated Concrete,” ACI Journal, Proc. 75, 520 (1978).
D. R. Paul, “Background and Perspective,” Ch. 1 in POLYMER BLENDS, Vol. I (D. R. Paul and S. Newman, Eds.), Academic Press, New York, 1978.
H. B. Hopfenberg and D. R. Paul, “Transport Phenomena in Polymer Blends,” Ch. 10 in POLYMER BLENDS, Vol. I (D. R. Paul and S. Newman, Eds.), Academic Press, New York, 1978.
D. R. Paul, “Interfacial Agents ('Compatibilizers') for Polymer Blends,” Ch. 12 in POLYMER BLENDS, Vol. II (D. R. Paul and S. Newman, eds.), Academic Press, New York, 1978.
D. R. Paul, “Fibers from Polymer Blends,” Ch. 16 in POLYMER BLENDS, Vol. II (D. R. Paul and S. Newman, eds.), Academic Press, New York, 1978.
W. J. Koros and D. R. Paul, “CO2 Sorption in Poly(ethylene Terephthalate) Above and Below the Glass Transition,” J. Polym. Sci.: Polym. Phys. Ed., 16, 1947 (1978).
W. J. Koros and D. R. Paul, “Transient and Steady-State Permeation in Poly(ethylene terephthalate) Above and Below the Glass Transition,” J. Polym. Sci.: Polym. Phys. Ed., 16, 2171 (1978).
D. C. Wahrmund, D. R. Paul, and J. W. Barlow, “Polyester-Polycarbonate Blends, I: Poly(butylene Terephthalate),” J. Appl. Polym. Sci., 22, 2155 (1978).
D. W. Fowler, L. E. Kukacka, D. R. Paul, E. K. Schrader, and W. G. Smoak, “Safety Aspects of Concrete-Polymer Materials,” American Concrete Institute, Special Publication, SP-58, 123 (1978).
D. W. Fowler, E. Limsuwan, P. Phinyawat, and D. R. Paul, “Strength and Behavior of Reinforced Polymer-Impregnated Concrete Beams,” American Concrete Institute, Special Publication, SP-58, 187 (1978).
R. P. Webster, D. W. Fowler, and D. R. Paul, “Bridge Deck Impregnation in Texas,” American Concrete Institute Special Publication, SP-58, 249 (1978).
D. W. Fowler and D. R. Paul, “Polymer-Concrete for Repair of Bridge Decks,” Proceedings of 2nd International Congress on Polymers in Concrete, p. 337 (1978).
E. Limsuwan, D. W. Fowler, D. R. Paul, and N. H. Burns, “Flexural Behavior of Post-Tensioned Polymer-Impregnated Concrete Beams,” Proceedings of 2nd International Congress on Polymers in Concrete, p. 361 (1978).
J. Bartholomew, D. W. Fowler, and D. R. Paul, “Current Status of Bridge Deck Impregnation,” Proceedings of 2nd International Congress on Polymers in Concrete, p. 399 (1978).
T. R. Nassar, D. R. Paul, and J. W. Barlow, “Polyester-Polycarbonate Blends, II: Poly(ethylene Terephthalate),” J. Appl. Polym. Sci., 23, 85 (1979).
R. N. Mohn, D. R. Paul, J. W. Barlow, and C. A. Cruz, “Polyester-Polycarbonate Blends, III: Polyesters Based on 1,4-Cyclohexanedimethanol/Terephthalic Acid/Isophthalic Acid,” J. Appl. Polym. Sci., 23, 575 (1979).
C. A. Cruz, D. R. Paul, and J. W. Barlow, “Polyester-Polycarbonate Blends, IV: Poly(e-caprolactone),” J. Appl. Polym. Sci., 23, 589 (1979).
D. W. Fowler, P. Yimprasert, and D. R. Paul, Discussion of paper: “Corrosion Protection of Reinforcing Provided by Polymer-Impregnated Concrete,” ACI J., Proc. 76, 567 (1979).
E. Nolley, D. R. Paul, and J. W. Barlow, “Examination of Some Miscible Polymer Blends for LCST Behavior,” J. Appl. Polym. Sci., 23, 623 (1979).
D. R. Paul and J. W. Barlow, “A Brief Review of Polymer Blend Technology,” Adv. Chem. Ser., 176, 315 (1979).
D. R. Paul, “Gas Sorption and Transport in Glassy Polymers,” Ber. Bunsenges. Phys. Chem., 83, 294 (1979).
V. T. Stannett, W. J. Koros, D. R. Paul, H. K. Lonsdale, and R. W. Baker, “Recent Advances in Membrane Science and Technology,” Adv. Polym. Sci., 32, 69 (1979).
A. G. Wonders and D. R. Paul, “Effect of CO2 Exposure History on Sorption and Transport in Polycarbonate,” J. Membrane Sci., 5, 63 (1979).
C. A. Cruz, J. W. Barlow, and D. R. Paul, “The Basis for Miscibility in Polyester-Polycarbonate Blends,” Macromolecules, 12, 726 (1979).
W. J. Koros, D. R. Paul, and G. S. Huvard, “Energetics of Gas Sorption in Glassy Polymers,” Polymer, 20, 956 (1979).
A. H. Chan and D. R. Paul, “Influence of History on the Gas Sorption, Thermal, and Mechanical Properties of Glassy Polycarbonate,” J. Appl. Polym. Sci., 24, 1539 (1979).
C. A. Cruz, D. R. Paul, and J. W. Barlow, “Polyester-Polycarbonate Blends. V. Linear Aliphatic Polyesters,” J. Appl. Polym. Sci., 24, 2101 (1979).
C. A. Cruz, J. W. Barlow, and D. R. Paul, “Polyester-Polycarbonate Blends. VI. Branched Aliphatic Polyesters,” J. Appl. Polym. Sci., 24, 2399 (1979).

W. J. Koros and D. R. Paul, “Sorption and Transport of CO2 Above and Below the Glass Transition of Poly(ethylene Terephthalate),” Polym. Eng. Sci., 20, 14 (1980).
A. H. Chan and D. R. Paul, “Effect of Sub-Tg Annealing on CO2 Sorption in Polycarbonate,” Polym. Eng. Sci., 20, 87 (1980).
E. Nolley, J. W. Barlow, and D. R. Paul, “Mechanical Properties of Polypropylene-Low Density Polyethylene Blends,” Polym. Eng. Sci., 20, 364 (1980).
D. R. Paul and J. W. Barlow, “Polymer Blends (or Alloys),” J. Macromol. Sci. - Rev. Macromol. Chem., C18, 109 (1980).
D. R. Paul and J. W. Barlow, “Crystallization from Miscible Polymer Blends,” Polym. Sci. Technol., 11, 239 (1980).
A. H. Chan and D. R. Paul, “Effect of Sub-Tg Annealing on Gas Transport in Polycarbonate,” J. Appl. Polym. Sci., 25, 971 (1980).
C. A. Cruz, J. W. Barlow, and D. R. Paul, “Polyester-Polycarbonate Blends. VII. Ring-Containing Polyesters,” J. Appl. Polym. Sci., 25, 1549 (1980).
P. Masi, D. R. Paul, and J. W. Barlow, “Properties of Compatible Blends of Polycarbonate and a Copolyester,” RHEOLOGY, Vol. 3: Applications (from VIII International Congress on Rheology), Plenum Press, New York, 315 (1980).
C. R. Lindsey, D. R. Paul, and J. W. Barlow, “Mechanical Properties of HDPE-PS-SEBS Blends,” J. Appl. Polym. Sci., 26, 1 (1981).
C. R. Lindsey, J. W. Barlow, and D. R. Paul, “Blends from Reprocessed Coextruded Products,” J. Appl. Polym. Sci., 26, 9 (1981).
A. J. Erb and D. R. Paul, “Gas Sorption and Transport in Polysulfone,” J. Membrane Sci., 8, 11 (1981).
J. W. Barlow and D. R. Paul, “Polymer Alloys,” Ann. Rev. Mater. Sci., 11, 299 (1981).
J. J. Ziska, J. W. Barlow, and D. R. Paul, “Miscibility in PVC-Polyester Blends,” Polymer, 22, 918 (1981).
D. R. Paul and G. Morel, “Membrane Technology,” Kirk-Othmer: Encyclopedia of Chemical Technology, Vol. 15, 3rd Edition, p. 92 (1981).
D. W. Fowler, A. H. Meyer, and D. R. Paul, “Techniques to Improve Strength of Polymer Concrete Made with Wet Aggregate,” in “Applications of Polymer Concrete,” Amer. Concrete Inst., Publication SP-69, 107 (1981).
W. J. Koros and D. R. Paul, “Observations Concerning the Temperature Dependence of the Langmuir Sorption Capacity of Glassy Polymers,” J. Polym. Sci.: Polym. Phys. Ed., 19, 1655 (1981).
R. S. Barnum, S. H. Goh, D. R. Paul, and J. W. Barlow, “Miscible Blends of Poly(styrene-co-allyl Alcohol) with Poly-e-caprolactone,” J. Appl. Polym. Sci., 26, 3917 (1981).
J. W. Barlow and D. R. Paul, “Polymer Blends and Alloys—A Review of Selected Considerations,” Polym. Eng. Sci., 21, 985 (1981).
W. A. Smith, J. W. Barlow, and D. R. Paul, “Chemistry of Miscible Polycarbonate-Copolyester Blends,” J. Appl. Polym. Sci., 26, 4233 (1981).
D. R. Paul and J. W. Barlow, “Properties of Miscible Polymer Blends,” Proceedings of PRI Conference on Polymer Blends, Paper No. 7 (1981).
D. W. Fowler and D. R. Paul, “Status of Concrete-Polymer Materials in the United States,” Proceedings of the 3rd International Congress on Polymers in Concrete, Japan, 20 (1981).
D.W. Fowler, A.H. Meyer, and D. R. Paul, “Low Temperature Curing of Polymer Concrete,” Proceedings of the 3rd International Congress on Polymers in Concrete, Japan, 421 (1981).
K. Katawaki, D.W. Fowler, and D. R. Paul, “Effect of Depth of Polymer Impregnation and Cracking on Corrosion of Reinforcing Steel,” Proceedings of the 3rd International Congress on Polymers in Concrete, Japan, 904 (1981).
P.T. Chang, D. R. Paul, and D.W. Fowler, “Properties of Polymers in Concrete,” Proceedings of the 3rd International Congress on Polymers in Concrete, Japan, 1279 (1981).
D. W. Bartlett, D. R. Paul, and J. W. Barlow, “Mechanical Compatibilization of Polypropylene Blends,” SPE Technical Papers, 27, 487 (1981). Modified version appears as "Additive Improves Properties of Scrap PP/PS Blends," in Modern Plastics, 58 (#12), 60 (1981).
S. H. Goh, D. R. Paul, J. W. Barlow, “Miscibility of Poly(a-Methyl Styrene-Co-Acrylonitrile) with Polyacrylates and Polymethacrylates,” Polym. Eng. Sci., 22, 34 (1982).
P. Masi, D. R. Paul, and J. W. Barlow, “Gas Sorption and Transport in a Copolyester and Its Blends with Polycarbonate,” J. Polym. Sci.: Polym. Phys. Ed., 20, 15 (1982).
E. A. Joseph, M. D. Lorenz, J. W. Barlow, and D. R. Paul, “Mechanical Properties of Miscible Polycarbonate-Copolyester Blends,” Polymer, 23, 112 (1982).
J. E. Harris, S. H. Goh, D. R. Paul, and J. W. Barlow, “Miscible Binary Blends Containing the Polyhydroxy Ether of Bisphenol-A and Various Aliphatic Polyesters,” J. Appl. Polym. Sci., 27, 839 (1982).
S. H. Goh, D. R. Paul, and J. W. Barlow, "Miscibility of Poly(neopentyl Glycol Adipate)/Chlorinated Polymer Blends,” J. Appl. Polym. Sci., 27, 1091 (1982).
G. Morel and D. R. Paul, “CO2 Sorption and Transport in Miscible Poly(phenylene oxide)/Polystyrene Blends,” J. Membrane Sci., 10, 273 (1982).
D. W. Bartlett, D. R. Paul, and J. W. Barlow, “Mechanical Properties of Blends Containing HDPE and PP,” J. Appl. Polym. Sci., 27, 2351 (1982).
K. Toi and D. R. Paul, “Effect of Polystyrene Molecular Weight on the Carbon Dioxide Sorption Isotherm,” Macromolecules, 15, 1104 (1982).
K. Toi, G. Morel, and D. R. Paul, “Gas Sorption and Transport in Poly(phenylene Oxide) and Comparisons with Other Glassy Polymers,” J. Appl. Polym. Sci., 27, 2997 (1982).
J. S. Chiou, D. R. Paul, and J. W. Barlow, “Miscibility of SAN with Polyacrylates and Polymethacrylates,” Polymer, 23, 1543 (1982).
R. S. Barnum, J. W. Barlow, and D. R. Paul, “Melting and Crystallization Behavior of Miscible Copolyester-Polycarbonate Blends,” J. Appl. Polym. Sci., 27, 4065 (1982).
J. W. Barlow and D. R. Paul, “The Thermodynamics of Polymer Miscibility,” SPE NATEC Preprints, p. 67, Oct. 1982.
D. R. Paul and J. W. Barlow, “Polymer Blends: Introductory Overview and Future Developments,” Ch. 1 in “Polymer Compatibility and Incompatibility: Principles and Practice,” K. Solc (ed.), MMI Press Symposium Series, Vol. 2, 1982.
P. Masi and D. R. Paul, “Modeling Gas Transport in Packaging Applications,” J. Membrane Sci., 12, 137 (1982).
E. A. Joseph, D. R. Paul, and J. W. Barlow, “Boiling Water Aging of a Miscible Blend of Polycarbonate and a Copolyester,” J. Appl. Polym. Sci., 27, 4807 (1982).
P. G. Mahlberg, P. Masi, and D. R. Paul, “Use of Polypropylene Film for Capping Tissue Culture Containers,” Phytomorphology, 30, 397 (1982).
S. K. Chandrasekaran and D. R. Paul, “Dissolution-Controlled Transport from Dispersed Matrices,” J. Pharmaceutical Sci., 71, 1399 (1982).
E. M. Woo, J. W. Barlow, and D. R. Paul, “Miscible Blends of a Vinylidene Chloride/Vinyl Chloride Copolymer with Aliphatic Polyesters,” J. Appl. Polym. Sci., 28, 1347 (1983).
J. E. Harris, D. R. Paul, and J. W. Barlow, “A Comparison of Miscible Binary Blend Interaction Parameters Measured by Different Methods,” Polym. Eng. Sci., 23, 676 (1983). Also appears in Adv. Chem. Series, 206, 43 (1984).
T. D. Traugott, J. W. Barlow, and D. R. Paul, “Mechanical Compatibilization of High Density Polyethylene-Poly(ethylene terephthalate) Blends,” J. Appl. Polym. Sci., 28, 2947 (1983).
M. U. Haddad, D. W. Fowler, and D. R. Paul, “Factors Affecting the Curing and Strength of Polymer Concrete,” J. Amer. Concrete Inst., Proceedings, 80, 396 (1983).
W. E. Preston, J. W. Barlow, and D. R. Paul, “Effect of Crystallinity on Gas Permeation in Miscible Polycarbonate - Copolyester Blends,” J. Appl. Polym. Sci., 29, 845 (1984).
D. R. Paul, “Gas Transport in Homogeneous Multicomponent Polymers,” J. Membrane Sci., 18, 75 (1984).
D. R. Paul and J. W. Barlow, “A Binary Interaction Model for Miscibility of Copolymers in Blends,” Polymer, 25, 487 (1984).
A. C. Fernandes, J. W. Barlow, and D. R. Paul, “Aliphatic Polyester Miscibility with Polyepichlorohydrin,” J. Appl. Polym. Sci., 29, 1971 (1984).
J. W. Barlow and D. R. Paul, “Mechanical Compatibilization of Immiscible Blends,” Polym. Eng. Sci., 24, 525 (1984).
W. E. Preston, J. W. Barlow, and D. R. Paul, “Effect of Crystallinity on Mechanical Properties of Miscible Polycarbonate - Copolyester Blends,” J. Appl. Polym. Sci., 29, 2251 (1984).
E. M. Woo, J. W. Barlow, and D. R. Paul, “Miscible Blends of a Vinylidene Chloride/Vinyl Chloride Copolymer with Polymethacrylates,” J. Polym. Sci.: Polym. Symp., 71, 137 (1984).
J. D. Keitz, J. W. Barlow, and D. R. Paul, “Polycarbonate Blends with Styrene/Acrylonitrile Copolymers,” J. Appl. Polym. Sci., 29, 3131 (1984).
W. J. Koros and D. R. Paul, “Gas Separations Using Membranes,” in Proceedings 6th Annual Industrial Energy Conservation Technology Conference, 525 (1984).
S. R. Murff, J. W. Barlow, and D. R. Paul, “Thermal and Mechanical Behavior of Polycarbonate-Poly(ethylene Terephthalate) Blends,” J. Appl. Polym. Sci., 29, 3231 (1984).
H. Suarez, J. W. Barlow, and D. R. Paul, “Mechanical Properties of ABS/Polycarbonate Blends,” J. Appl. Polym. Sci., 29, 3253 (1984).
D. R. Paul, “Solute Release from Membrane-Matrix Composites,” J. Membrane Sci., 21, 203 (1984).
E. M. Woo, J. W. Barlow, and D. R. Paul, “Phase Behavior of Binary Mixtures of Oligomeric Styrene/Allyl Alcohol Copolymers and Aliphatic Polyesters,” J. Appl. Polym. Sci., 29, 3837 (1984).
J. S. Chiou, J. W. Barlow, and D. R. Paul, “Sorption and Transport of Gases in Miscible Poly(methyl acrylate)/ Poly(epichlorohydrin) Blends,” J. Appl. Polym. Sci., 30, 1173 (1985).
E. M. Woo, J. W. Barlow, and D. R. Paul, “Thermodynamics of the Phase Behavior of Poly(vinyl chloride)/Aliphatic Polyester Blends,” Polymer, 26, 763 (1985).
D. R. Paul, “Modeling of Solute Release from Laminated Matrices,” J. Membrane Sci., 23, 221 (1985).
J. S. Chiou, J. W. Barlow, and D. R. Paul, “Plasticization of Glassy Polymers by CO2,” J. Appl. Polym. Sci., 30, 2633 (1985).
D. R. Paul, “Thermodynamic Theory and Experimental Techniques for Polymer Blends,” NATO ASI Series (Martinus Nijhoff Publishers), Series E: No. 89, pp. 1-23 (1985).
D. R. Paul, “Transport Properties of Polymers,” ACS Symp. Ser., 285, 253 (1985).
M. J. El-Hibri, and D. R. Paul, “Effects of Uniaxial Drawing and Heat-Treatment on Gas Sorption and Transport in PVC,” J. Appl. Polym. Sci., 30, 3649 (1985).
J. S. Chiou, J. W. Barlow, and D. R. Paul, “Polymer Crystallization Induced by Sorption of CO2 Gas,” J. Appl. Polym. Sci., 30, 3911 (1985).
J. S. Chiou, Y. Maeda, and D. R. Paul, “Gas and Vapor Sorption in Polymers Just Below Tg,” J. Appl. Polym. Sci., 30, 4019 (1985).
R. S. Barnum, S. H. Goh, J. W. Barlow, and D. R. Paul, “Excess Heat Capacities for Two Miscible Polymer Blend Systems,” J. Polym. Sci.: Polym. Lett. Ed., 23, 395 (1985).
E. M. Woo, J. W. Barlow, and D. R. Paul, “Phase Behavior of Polycarbonate Blends with Selected Halogenated Polymers,” J. Appl. Polym. Sci., 30, 4243 (1985).
J.-L. G. Pfennig, H. Keskkula, J. W. Barlow, and D. R. Paul, “Experimental Simulation of the Effect of Intramolecular Repulsion on the Heat of Mixing for Polymer Blends,” Macromolecules, 18, 1937 (1985).
D. R. Paul and W. J. Koros, “Polymer Research and Education at The University of Texas at Austin,” Polymer News, 116 (1985).
Y. Maeda and D. R. Paul, “Selective Gas Transport in Miscible PPO-PS Blends,” Polymer, 26, 2055 (1985).
D. R. Paul, “Polymer Blends - Phase Behavior and Property Relationships,” Adv. Chem. Ser., 211, 3 (1986).
S. R. Murff, J. W. Barlow, and D. R. Paul, “Environmental Stress Crazing and Cracking of PMMA-PVF2 Blends,” Adv. Chem. Ser., 211, 313 (1986).
H. Keskkula, M. Schwarz, and D. R. Paul, “Examination of Failure in Rubber Toughened Polystyrene,” Polymer, 27, 211 (1986).
H. Keskkula and D. R. Paul, “Thermal Behavior of Polyethyloxazoline,” J. Appl. Polym. Sci., 31, 941 (1986).
F. J. Matthews, J. R. Fair, J. W. Barlow, D. R. Paul, and C. Cozewith, “Solvent Removal from Ethylene-Propylene Elastomers. 1. Determination of Diffusion Mechanism,” Ind. Eng. Chem. Product R&D, 25, 58 (1986).
F. J. Matthews, R. Fair, J. W. Barlow, D. R. Paul, and C. Cozewith, “Solvent Removal from Ethylene-Propylene Elastomers. 2. Modeling of Continuous Flow Stripping Vessels,” Ind. Eng. Chem. Product R&D, 25, 65 (1986).
D. R. Paul, “Polymer Blends: New Materials from Old,” Shell Petrochemicals, No. 1, 22 (1986).
H. Keskkula and D. R. Paul, Miscibility of Polyethyloxazoline with Thermoplastic Polymers,” J. Appl. Polym. Sci., 31, 1189 (1986).
M. J. El-Hibri and D. R. Paul, “Gas Transport in Poly(vinylidene fluoride): Effects of Uniaxial Drawing and Processing Temperature,” J. Appl. Polym. Sci., 31, 2533 (1986).
M. J. El-Hibri and D. R. Paul, “Effects of Mechanical Drawing on Gas Transport in an Emulsion Acrylic Multipolymer,” J. Appl. Polym. Sci., 31, 2583 (1986).
C. L. Kiplinger, D. F. Persico, R. J. Lagow, and D. R. Paul, “Gas Transport in Partially Fluorinated Low-Density Polyethylene,” J. Appl. Polym. Sci., 31, 2617 (1986).
J. S. Chiou and D. R. Paul, “Sorption and Transport of CO2 in PVF2/PMMA Blends,” J. Appl. Polym. Sci., 32, 2897 (1986).
J.-L. G. Pfennig, H. Keskkula, and D. R. Paul, “Water Extraction of Polyethyloxazoline from Miscible and Immiscible Polymer Blends,” J. Appl. Polym. Sci., 32, 3657 (1986).
V. S. Shah, J. D. Keitz, D. R. Paul, and J. W. Barlow, “Miscible Ternary Blends Containing Polycarbonate, SAN, and Aliphatic Polyesters,” J. Appl. Polym. Sci., 32, 3863 (1986).
E. M. Woo, J. W. Barlow, and D. R. Paul, “Phase Behavior of Blends of Aliphatic Polyesters with a Vinylidene Chloride/Vinyl Chloride Copolymer,” J. Appl. Polym. Sci., 32, 3889 (1986).
J. S. Chiou and D. R. Paul, “Sorption Equilibria and Kinetics of Ethanol in Miscible Poly(vinylidene fluoride)/Poly(methyl methacrylate) Blends,” Polym. Eng. Sci., 26, 1218 (1986).
J. S. Chiou and D. R. Paul, “Sorption and Transport of Inert Gases in PVF2/PMMA Blends,” J. Appl. Polym. Sci., 32, 4793 (1986).
W. J. Koros and D. R. Paul, “Current Aspects of Membrane-Based Separations of Gases,” MMI Press Symposium Series, Vol. 5, p. 155 (1986).
A. C. Fernandes, J. W. Barlow, and D. R. Paul, “Phase Behavior of Binary Mixtures of Styrene/Acrylonitrile Copolymers and Aliphatic Polyesters,” J. Appl. Polym. Sci., 32, 5357 (1986).
A. C. Fernandes, J. W. Barlow, and D. R. Paul, “Blends Containing Polymers of Epichlorohydrin and Ethylene Oxide. Part I. Polymethacrylates,” J. Appl. Polym. Sci., 32, 5481 (1986).
A. C. Fernandes, J. W. Barlow, and D. R. Paul, “Blends Containing Polymers of Epichlorohydrin and Ethylene Oxide. Part II. Polyacrylates,” J. Appl. Polym. Sci., 32, 6073 (1986).
A. C. Fernandes, J. W. Barlow, and D. R. Paul, “Blends Containing Tetramethyl Bisphenol-A Polycarbonate. Part I: Styrenic Polymers,” Polymer, 27, 1788 (1986).
A. C. Fernandes, J. W. Barlow, and D. R. Paul, “Blends Containing Tetramethyl Bisphenol-A Polycarbonate. Part II. Aliphatic Polyesters,” Polymer, 27, 1799 (1986).
Y. Maeda and D. R. Paul, “Effect of Antiplasticization on Selectivity and Productivity of Gas Separation Membranes,” J. Membrane Sci., 30, 1 (1987).
J. S. Chiou, Y. Maeda, and D. R. Paul, “Gas Permeation in Polyethersulfone,” J. Appl. Polym. Sci., 33, 1823 (1987).
Y. Maeda and D. R. Paul, “Effect of Antiplasticization on Gas Sorption and Transport. Part I: Polysulfone,” J. Polym. Sci.: Part B: Polym. Phys., 25, 957 (1987).
Y. Maeda and D. R. Paul, “Effect of Antiplasticization on Gas Sorption and Transport. Part II: Poly(phenylene oxide),” J. Polym. Sci.: Part B: Polym. Phys., 25, 981 (1987).
Y. Maeda and D. R. Paul, “Effect of Antiplasticization on Gas Sorption and Transport. Part III: Free Volume Interpretation,” J. Polym. Sci.: Part B: Polym. Phys., 25, 1005 (1987).
J. S. Chiou, “Gas Permeation in Miscible Blends of Poly(methyl methacrylate) with Bisphenol Chloral Polycarbonate,” J. Appl. Polym. Sci., 33, 2935 (1987).
J. S. Chiou, J. W. Barlow, and D. R. Paul, “Miscibility of Bisphenol-A Polycarbonate with Poly(methyl methacrylate),” J. Polym. Sci.: Part B: Polym. Phys., 25, 1459 (1987).
M. E. Fowler, J. W. Barlow, and D. R. Paul, “Effect of Copolymer Composition on the Miscibility of Blends of Styrene-Acrylonitrile Copolymers with Poly(methyl methacrylate),” Polymer, 28, 1177 (1987).
W. H. Christiansen, D. R. Paul, and J. W. Barlow, “The Phase Behavior of Ternary Blends Containing Polycarbonate, Phenoxy, and Poly-caprolactone,” J. Appl. Polym. Sci., 34, 537 (1987).
J. S. Chiou and D. R. Paul, “Gas Permeation in Miscible Homopolymer-Copolymer Blends: I. Poly(methyl methacrylate) and Styrene/Acrylonitrile Copolymers,” J. Appl. Polym. Sci., 34, 1037 (1987).
J. S. Chiou and D. R. Paul, “Gas Transport in a Thermotropic Liquid Crystalline Polyester,” J. Polym. Sci.: Part B: Polym. Phys., 25, 1699 (1987).
J. S. Chiou and D. R. Paul, “Effects of CO2 Exposure on Gas Transport Properties of Glassy Polymers,” J. Membrane Sci., 32, 195 (1987).
J. S. Chiou and D. R. Paul, “Gas Permeation in Miscible Homopolymer-Copolymer Blends: II. Tetramethyl Bisphenol-A Polycarbonate and a Styrene/Acrylonitrile Copolymer,” J. Appl. Polym. Sci., 34, 1503 (1987).
N. Muruganandam, W. J. Koros, and D. R. Paul, “Gas Sorption and Transport in Substituted Polycarbonates,” J. Polym. Sci.: Part B: Polym. Phys., 25, 1999 (1987).
M. E. Fowler, H. Keskkula, and D. R. Paul, “Synergistic Toughening in Rubber Modified Blends,” Polymer, 28, 1703 (1987).
K. E. Min, J. S. Chiou, J. W. Barlow, and D. R. Paul, “A Completely Miscible Ternary Blend: Poly(methyl methacrylate)/Poly(epichlorohydrin)/ Poly(ethylene oxide),” Polymer, 28, 1721 (1987).
P. S. Tucker, J. W. Barlow, and D. R. Paul, “Phase Behavior for Blends of Styrene Containing Triblock Copolymers with Poly(2,6-dimethyl-1,4-phenylene oxide),” J. Appl. Polym. Sci., 34, 1817 (1987).
H. Keskkula, D. R. Paul, P. Young, and R. S. Stein, “Diffusion of Miscible Polymers in Multilayer Films,” J. Appl. Polym. Sci., 34, 1861 (1987).
D. R. Paul, “Compatibilization of Polymer Blends by Styrene/Hydrogenated Butadiene Block Copolymers” Ch. 12, Sec. 6 in “Thermoplastic Elastomers: A Comprehensive Review,” R. Legge, G. Holden, and H. Schroeder, Eds., Hanser Publishers, Munich, 1987.
N. Muruganandam and D. R. Paul, “Evaluation of Substituted Polycarbonates and a Blend with Polystyrene as Gas Separation Membranes,” J. Membrane Sci., 34, 185 (1987).
N. Muruganandam and D. R. Paul, “Gas Sorption and Transport in Miscible Blends of Tetramethyl Bisphenol-A Polycarbonate and Polystyrene,” J. Polym. Sci.: Part B: Polym. Phys., 25, 2315 (1987).
J. W. Barlow and D. R. Paul, “The Importance of Enthalpic Interactions in Polymeric Systems,” Polym. Eng. Sci., 27, 1482 (1987).
K. E. Min and D. R. Paul, “Miscibility of Blends of Tetramethyl Bisphenol-A Polycarbonate and Styrene/Methyl Methacrylate Copolymers,” Macromolecules, 20, 2828 (1987).
H. Keskkula, D. R. Paul, K. M. McCreedy, and D. E. Henton, “Methyl Methacrylate Grafted Rubbers as Impact Modifiers for Styrenic Polymers,” Polymer, 28, 2063 (1987).
M. E. Fowler, J. W. Barlow, and D. R. Paul, “Kinetics of Adhesion Development at PMMA-SAN Interfaces,” Polymer, 28, 2145 (1987).
M. C. Schwarz, H. Keskkula, J. W. Barlow, and D. R. Paul, “Deformation Behavior of HDPE/(PEC/PS)/SEBS Blends,” J. Appl. Polym. Sci., 35, 653 (1988).
J. W. Barlow, and D. R. Paul, H. Keskkula, and D. R. Paul, “Polymer Blends,” Mark-Bikales-Overberger-Menges: Encyclopedia of Polymer Science and Engineering, John Wiley and Sons, 2nd Ed., Vol. 12, pp. 399-461 (1988).
T. A. Barbari, W. J. Koros, and D. R. Paul, “Gas Transport in Polymers Based on Bispheonol-A,” J. Polym. Sci.: Part B: Polym. Phys., 26, 709 (1988).
T. A. Barbari, W. J. Koros, and D. R. Paul, “Gas Sorption in Polymers Based on Bisphenol-A,” J. Polym. Sci.: Part B: Polym. Phys., 26, 729 (1988).
M. E. Fowler, H. Keskkula, and D. R. Paul, “Mechanical Behavior of Dual Rubber Modified SAN,” J. Appl. Polym. Sci., 35, 1563 (1988).
K. E. Min and D. R. Paul, “Effect of Tacticity on Permeation Properties of Poly(methyl methacrylate),” J. Polym. Sci.: Part B: Polym. Phys., 26, 1021 (1988).
P. S. Tucker, J. W. Barlow, and D. R. Paul, “Thermal, Mechanical and Morphological Analysis of Poly(2,6-dimethyl-1,4 phenylene oxide)/Styrene-Butadiene-Styrene Blends,” Macromolecules, 21, 1678 (1988).
M. C. Schwarz, J. W. Barlow, and D. R. Paul, “Mechanical Properties of HDPE/(PEC/PS)/SEBS Blends,” J. Appl. Polym. Sci., 35, 2053 (1988).
M. B. Moe, W. J. Koros, and D. R. Paul, “Effects of Molecular Structure and Thermal Annealing on Gas Transport in Two Tetra-methyl Bisphenol-A Polymers,” J. Polym. Sci.: Part B: Polym. Phys., 26, 1931 (1988).
C. H. Lai, D. R. Paul, and J. W. Barlow, “Group Contribution Methods for Predicting Polymer-Polymer Miscibility from Heats of Mixing of Liquids. 1. Comparison of the Modified Guggenheim Quasi-Chemical (MGQ) and UNIQUAC Models,” Macromolecules, 21, 2492 (1988).
P. S. Tucker, J. W. Barlow, and D. R. Paul, “Molecular Weight Effects of Phase Behavior of Blends of Poly(phenylene oxide) with Styrenic Block Copolymers,” Macromolecules, 21, 2794 (1988).
P. S. Tucker and D. R. Paul, “Simple Model for Enthalpic Effects in Homopolymer/Block Copolymer Blends,” Macromolecules, 21, 2801 (1988).
K. E. Min and D. R. Paul, “Blends of Poly(vinyl methyl ether) with Styrenic Copolymers,” J. Polym. Sci.: Part B: Polym. Phys., 26, 2257 (1988).
J. S. Chiou and D. R. Paul, “Gas Permeation in a Dry Nafion Membrane,” Ind. Eng. Chem. Res., 27, 2161 (1988).
Y. Maeda and D. R. Paul, “Response to Comments by Vrentas, Duda, and Ling,” J. Membrane Sci., 40, 109 (1989).
M. E. Fowler, H. Keskkula, and D. R. Paul, “Distribution of MBS Emulsion Particles in Immiscible Polystyrene/SAN Blends,” J. Appl. Polym. Sci., 37, 225 (1989).
M. C. Schwarz, J. W. Barlow, and D. R. Paul, “Morphology of HDPE/(PEC/PS) Blends Modified with SEBS Copolymers,” J. Appl. Polym. Sci., 37, 403 (1989).
M. E. Fowler, D. R. Paul, L. A. Cohen, and W. T. Freed, “Blends of Imidized Acrylic Polymers with SAN Copolymers and with PVC,” J. Appl. Polym. Sci., 37, 513 (1989).
K. E. Min and D. R. Paul, “Polycarbonate-Styrene/Methyl Methacrylate Copolymer Blends,” J. Appl. Polym. Sci., 37, 1153 (1989).
C. H. Lai, D. R. Paul, and J. W. Barlow, “Group Contribution Methods for Predicting Polymer-Polymer Miscibility from Heats of Mixing of Liquids. 2. Polyester-Containing Binary Blends,” Macromolecules, 22, 374 (1989).
J. H. Kim, J. W. Barlow, and D. R. Paul, “Interactions in SMA-SAN Blends,” J. Polym. Sci.: Part B: Polym. Phys., 27, 223 (1989).
T. A. Barbari, W. J. Koros, and D. R. Paul, “Polymeric Membranes Based on Bisphenol-A for Gas Separations,” J. Membrane Sci., 42, 69 (1989).
C. A. Cruz-Ramos and D. R. Paul, “Evaluation of Interactions in Blends of Ethylene-Vinyl Acetate Copolymers with Poly(vinyl chloride) Using Model Compounds,” Macromolecules, 22, 1289 (1989).
W. H. Jo, C. A. Cruz-Ramos, and D. R. Paul, “FTIR Investigation of Interactions in Blends of PMMA with a Styrene/Acrylic Acid Copolymer and Their Analogs,” J. Polym. Sci: Part B: Polym. Phys., 27, 1057 (1989).
J. H. Kim, J. W. Barlow, and D. R. Paul, “Phase Behavior of Blends of Poly(vinyl chloride) with an a-Methyl Styrene/Acrylonitrile Copolymer,” Polym. Eng. Sci., 29, 581 (1989).
P. Padunchewit, D. R. Paul, and J. W. Barlow, “Blends of Polystyrene with Phenylene Oxide Copolymers,” ACS Symp. Ser., 395, 84 (1989).
M. Nishimoto, H. Keskkula, and D. R. Paul, “Miscibility of Blends of Polymers Based on Styrene, Acrylonitrile, and Methyl Methacrylate,” Polymer, 30, 1279 (1989).
A. C. Puleo, D. R. Paul, and P. K. Wong, “Gas Sorption and Transport in Semicrystalline Poly(4-methyl-1-pentene),” Polymer, 30, 1357 (1989).
G. Shaver, D. R. Paul, and J. W. Barlow, “Polymer Blend Compatibilization through Chemical Reaction,” Proceedings of the First International Congress on Compatibilizers and Reactive Polymer Alloying (COMPALLOY '89), p. 221 (1989).
J. S. Chiou and D. R. Paul, “Gas Sorption and Permeation in Poly(ethyl methacrylate),” J. Membrane Sci., 45, 167 (1989).
D. R. Paul, “Control of Phase Structure in Polymer Blends,” in “Functional Polymers,” D. E. Bergbreiter and C. R. Martin, Eds., Plenum Press, New York, 1 (1989).
J. H. Kim, J. W. Barlow, and D. R. Paul, “Miscibility of Poly(vinyl chloride) with Styrene/Acrylonitrile Copolymers,” J. Polym. Sci.: Part B: Polym. Phys., 27, 2211 (1989).
A. C. Puleo, N. Muruganandam, and D. R. Paul, “Gas Sorption and Transport in Substituted Polystyrenes,” J. Polym. Sci.: Part B: Polym. Phys., 27, 2385 (1989).
M. W. Hellums, W. J. Koros, G. R. Husk, and D. R. Paul, “Fluorinated Polycarbonates for Gas Separation Applications,” J. Membrane Sci., 46, 93 (1989).
J. W. Barlow and D. R. Paul, “Multiphase Polymer Alloys,” in “Frontiers of Macromolecular Science,” T. Saegusa, T. Higashimura, and A. Abe, Eds., Blackwell Sci. Publ., p. 381 (1989).
A. C. Puleo, D. R. Paul, and S. S. Kelley, “The Effect of Degree of Acetylation on Gas Sorption and Transport Behavior in Cellulose Acetate,” J. Membrane Sci., 47, 301 (1989).
J. W. Barlow, C. H. Lai, and D. R. Paul, “Prediction of Polymer-Polymer Miscibility with a Group Contribution Method,” Con-temporary Topics in Polymer Science: Vol. 6: Multiphase Macromolecular Systems, B. M. Culbertson, Ed., Plenum Press, New York, p. 505 (1989).

D. H. Weinkauf and D. R. Paul, “The Effects of Structural Order on Barrier Properties,” ACS Symp. Ser. on “Barrier Polymers and Barrier Structures,” 423, 60 (1990).
G. R. Brannock, J. W. Barlow, and D. R. Paul, “Blends of Styrene/Acrylic Acid Copolymers and Acrylic Polymers,” J. Polym. Sci.: Part B: Polym. Phys., 28, 871 (1990).
H. Kim, H. Keskkula, and D. R. Paul, “Toughening of SAN Copolymers with an SAN Emulsion Grafted Rubber,” Polymer, 31, 869 (1990).
Han Do Kim and D. R. Paul, “Preparation and Properties of a Series of Thermotropic Liquid Crystalline Copolyesters,” J. Appl. Polym. Sci., 40, 155 (1990).
J. H. Kim, H. Keskkula, and D. R. Paul, “Toughening of SMA Copolymers with an SAN-Grafted Rubber,” J. Appl. Polym. Sci., 40, 183 (1990).
M. Nishimoto, H. Keskkula, and D. R. Paul, “Blends of Poly(styrene-co-acrylonitrile) and Methyl Methacrylate Based Copolymers,” Macromolecules, 23, 3633 (1990).
P. C. Raymond and D. R. Paul, “Sorption and Transport of Pure Gases in Random Styrene/Methyl Methacrylate Copolymers,” J. Polym. Sci.: Part B: Polym. Phys., 28, 2079 (1990).
P. C. Raymond and D. R. Paul, “Sorption and Transport of Pure CO2 and CH4 in Miscible Bisphenol Chloral Polycarbonate/ Poly(methyl methacrylate) Blends,” J. Polym. Sci.: Part B: Polym. Phys., 28, 2103 (1990).
H. D. Kim and D. R. Paul, “Comparison of the Properties of Thermotropic Liquid Crystalline Copolyesters Containing Different Dissymmetrical Units,” J. Appl. Polym. Sci., 41, 1843 (1990).
P. C. Raymond and D. R. Paul, “Kinetics of CO2 Conditioning of Copolymers and Blends Containing MMA Units,” J. Polym. Sci.: Part B: Polym. Phys., 28, 2213 (1990).
H. Keskkula, H. Kim, and D. R. Paul, “Impact Modification of Styrene-Acrylonitrile Copolymers by Methyl Methacrylate Grafted Rubbers,” Polym. Eng. Sci., 30, 1373 (1990).
Inha Park, J. W. Barlow, and D. R. Paul, “Adhesion of Styrenic Triblock Copolymers to Miscible Blends of Polystyrene and a Phenylene Ether Copolymer,” Polymer, 31, 2311 (1990).
G. R. Brannock and D. R. Paul, “Phase Behavior of Ternary Polymer Blends Composed of Three Miscible Binaries,” Macromolecules, 23, 5240 (1990).
J. S. Chiou and D. R. Paul, “Phase Behavior of PMMA-Phenoxy Blends,” J. Appl. Polym. Sci., 42, 279 (1991).
J. M. Mohr, D. R. Paul, T. Mlsna, and R. J. Lagow, “Surface Fluorination of Composite Membranes. Part I: Transport Properties,” J. Membrane Sci., 55, 131 (1991).
J. M. Mohr, D. R. Paul, Y. Taru, T. Mlsna, and R. J. Lagow, “Surface Fluorination of Composite Membranes. Part II: Characterization of the Fluorinated Layer,” J. Membrane Sci., 55, 149 (1991).
M. Nishimoto, H. Keskkula, and D. R. Paul, “Role of Slow Phase Separation in Assessing the Equilibrium Phase Behaviour of PC-PMMA Blends,” Polymer, 32, 272 (1991).
K. S. Rebeiz, D. W. Fowler, and D. R. Paul, “Making Polymer Concrete with Recycled PET,” Plastics Engineering, 47(2), 33 (1991).
J. M. Mohr, D. R. Paul, I. Pinnau, and W. J. Koros, “Surface Fluorination of Polysulfone Asymmetric Membranes and Films,” J. Membrane Sci., 56, 77 (1991).
D. H. Weinkauf and D. R. Paul, “Gas Transport Properties of Liquid Crystalline Poly(ethylene terephthalate-co-p-Oxybenzoate),” J. Polym. Sci.: Part B: Polym. Phys., 29, 329 (1991).
G. R. Brannock, J. W. Barlow, and D. R. Paul, “Blends of Styrene/Maleic Anhydride Copolymers with Polymethacrylates,” J. Polym. Sci.: Part B: Polym. Phys., 29, 413 (1991).
J. M. Mohr and D. R. Paul, “Comparison of Gas Permeation in Vinyl and Vinylidene Polymers,” J. Appl. Polym. Sci., 42, 1711 (1991).
J. M. Mohr, D. R. Paul, Y. Taru, T. E. Mlsna, and R. J. Lagow, “XPS Characterization of Surface Fluorinated Poly(4-Methyl-1-Pentene),” J. Appl. Polym. Sci., 42, 2509 (1991).
J. S. McHattie, W. J. Koros, and D. R. Paul, “Effect of Isopropylidene Replacement on Gas Transport Properties of Polycarbonates,” J. Polym. Sci.: Part B: Polym. Phys., 29, 731 (1991).
J. S. McHattie, W. J. Koros, and D. R. Paul, “Gas Transport Properties of Polysulfones: 1. Role of Symmetry of Methyl Group Placement on Bisphenol Rings,” Polymer, 32, 840 (1991).
J. M. Mohr and D. R. Paul, “Effect of Casting Solvent on the Permeability of Poly(4-methyl-1-pentene),” Polymer, 32, 1236 (1991).
M. Nishimoto, H. Keskkula, and D. R. Paul, “Miscibility of Polycarbonate and Methyl Methacrylate-Based Copolymers,” Polymer, 32, 1274 (1991).
K. S. Rebeiz, D. W. Fowler, and D. R. Paul, “Fundamental Properties of Polymer Concrete Using Resins Made with Recycled PET,” Proceedings of the Third International Symposium on Mechanics of Polymer Composites, (April, Prague), 367 (1991).
V. J. Triacca, S. Ziaee, J. W. Barlow, H. Keskkula, and D. R. Paul, “Reactive Compatibilization of Blends of Nylon 6 and ABS Materials,” Polymer, 32, 1401 (1991).
Hyungsu Kim, H. Keskkula, and D. R. Paul, “Effect of Acrylonitrile Content on the Toughness of ABS Materials,” Polymer, 32, 1447 (1991).
P. A. Rodgers, D. R. Paul, and J. W. Barlow, “Procedure for Predicting Lower Critical Solution Temperature Behavior in Binary Blends of Polymers,” Macromolecules, 24, 4101 (1991).
Inha Park, D. R. Paul, and J. W. Barlow, “Terminal Anhydride Functionalization of Polystyrene,” J. Polym. Sci.: Part A: Polym. Chem., 29, 1329 (1991).
D. R. Paul, “Strategies for Compatibilization of Polymer Blends,” Proceedings of the Sixth International Conference on Mechanical Behavior of Materials, M. Jono, T. Inoue, Eds., Pergamon, Oxford, Vol. 3, 287 (1991). Also appears in Adv. Polym. Blends and Alloys Technol., 4, 80 (1993).
Hyungsu Kim, H. Keskkula, and D. R. Paul, “The Role of Inherent Ductility in Rubber Toughening of Brittle Polymers,” Polymer, 32, 2372 (1991).
J. M. Mohr, D. R. Paul, G. L. Tullos, and P. E. Cassidy, “Gas Transport Properties of a Series of Poly(ether ketone) Polymers,” Polymer, 32, 2387 (1991).
J. S. McHattie, W. J. Koros, and D. R. Paul, “Gas Transport Properties of Polysulphones: 2. Effect of Bisphenol Connector Groups,” Polymer, 32, 2618 (1991).
M. W. Hellums, W. J. Koros, G. R. Husk, and D. R. Paul, “Gas Transport in Halogen-Containing Aromatic Polycarbonates,” J. Appl. Polym. Sci., 43, 1977 (1991).
Y. Takeda and D. R. Paul, “Phase Homogenization of Mixtures of Poly(m-xylene adipamide) and Nylon 6 by Interchange Reactions,” Polymer, 32, 2771 (1991).
K. S. Rebeiz, D. W. Fowler, and D. R. Paul, “Recycling Plastics in Polymer Concrete Systems for Engineering Applications,” Polym.-Plast. Technol. Eng., 30, 809 (1991).
D. H. Weinkauf, H. D. Kim, and D. R. Paul, “Gas Transport Properties of Liquid Crystalline Poly(p-phenyleneterephthalamide),” Macromolecules, 25, 788 (1992).
A. J. Oshinski, H. Keskkula, and D. R. Paul, “Rubber Toughening of Polyamides with Functionalized Block Copolymers: 1. Nylon-6,” Polymer, 33, 268 (1992).
A. J. Oshinski, H. Keskkula, and D. R. Paul, “Rubber Toughening of Polyamides with Functionalized Block Copolymers: 2. Nylon-6,6,” Polymer, 33, 284 (1992).
K. S. Rebeiz, D. W. Fowler, and D. R. Paul, “Polymer Concrete and Polymer Mortar Using Resins Based on Recycled Poly(ethylene terephthalate),” J. Appl. Polym. Sci., 44, 1649 (1992).
T. W. Cheng, H. Keskkula, and D. R. Paul, “Thermal Aging of Impact Modified Polycarbonate," J. Appl. Polym. Sci., 45, 531 (1992).
T. W. Cheng, H. Keskkula, and D. R. Paul, “Property and Morphology Relationships for Ternary Blends of Polycarbonate, Brittle Polymers, and an Impact Modifier,” Polymer, 33, 1606 (1992).
C. K. Kim and D. R. Paul, “Interaction Parameters for Blends Containing Polycarbonates: 1. Tetramethyl Bisphenol-A Polycarbonate/Polystyrene,” Polymer, 33, 1630 (1992).
J. S. McHattie, W. J. Koros, and D. R. Paul, “Gas Transport Properties of Polysulfones: 3. Comparison of Tetramethyl-Substituted Bisphenols,” Polymer, 33, 1701 (1992).
C. K. Kim and D. R. Paul, “Interaction Parameters for Blends Containing Polycarbonates: 2. Tetramethyl Bisphenol A Polycarbonate-Styrene Copolymers,” Polymer, 33, 2089 (1992).
C. L. Aitken, J. S. McHattie, and D. R. Paul, “Dynamic Mechanical Behavior of Polysulfones,” Macromolecules, 25, 2910 (1992).
C. K. Kim and D. R. Paul, “Effects of Polycarbonate Molecular Structure on Miscibility with Other Polymers,” Macromolecules, 25, 3097 (1992).
T. W. Cheng, H. Keskkula, and D. R. Paul, “Effect of Melt Annealing on the Morphology and Properties of Polycarbonate Blends,” J. Appl. Polym. Sci., 45, 1245 (1992).
D. H. Weinkauf and D. R. Paul, “Gas Transport Properties of Thermotropic Liquid-Crystalline Copolyesters: I. The Effects of Orientation and Annealing,” J. Polym. Sci.: Part B: Polym. Phys., 30, 817 (1992).
D. H. Weinkauf and D. R. Paul, “Gas Transport Properties of Thermotropic Liquid-Crystalline Copolyesters: II. The Effects of Copolymer Composition,” J. Polym. Sci.: Part B: Polym. Phys., 30, 837 (1992).
I. Park, H. Keskkula, and D. R. Paul, “Toughening of Polystyrene and Poly(phenylene oxide) Matrices with Elastomeric Styrene-Based Block Copolymers: The Role of Molecular Architecture,” J. Appl. Polym. Sci., 45, 1313 (1992).
C. L. Aitken, W. J. Koros, and D. R. Paul, “Effect of Structural Symmetry on Gas Transport Properties of Polysulfones,” Macromolecules, 25, 3424 (1992).
C. L. Aitken, W. J. Koros, and D. R. Paul, “Gas Transport Properties of Biphenol Polysulfones,” Macromolecules, 25, 3651 (1992).
I. Park, J. W. Barlow, and D. R. Paul, “The In Situ Reactive Compatibilization of Nylon-6/Polystyrene Blends Using Anhydride Functionalized Polystyrenes,” J. Polym. Sci.: Part B: Polym. Phys., 30, 1021 (1992).
V. V. Teplyakov, D. R. Paul, N. B. Bespalova, and E. Sh. Finkelshtein, “Gas Permeation in a Fluorine-Containing Polynorbornene,” Macromolecules, 25, 4218 (1992).
J. N. Clark, J. S. Higgins, C. K. Kim, and D. R. Paul, “Re-examination of Poly(methyl methacrylate)/Poly(epichlorohydrin) Blends by Small Angle Neutron Scattering and Differential Scanning Calorimetry,” Polymer, 33, 3137 (1992).
Y. Takeda, H. Keskkula, and D. R. Paul, “Effect of Polyamide Functionality on the Morphology and Toughness of Blends with a Functionalized Block Copolymer,” Polymer, 33, 3173 (1992).
C. K. Kim, M. Aquilar-Vega, and D. R. Paul, “Dynamic Mechanical and Gas Transport Properties of Blends and Random Copolymers of Bisphenol-A Polycarbonate and Tetramethyl Bisphenol-A Polycarbonate,” J. Polym. Sci.: Part B: Polym. Phys., 30, 1131 (1992).
Y. Takeda, H. Keskkula, and D. R. Paul, “Toughening of Phase-Homogenized Mixtures of Nylon-6 and Poly(m-xylene adipamide) with a Functionalized Block Copolymer,” Polymer 33, 3394 (1992).
Y. Takeda and D. R. Paul, “Morphology of Nylon-6 Blends with Styrenic Polymers,” J. Polym. Sci.: Part B: Polym. Phys., 30, 1273 (1992).
H. Keskkula, D. R. Paul, and A. A. Platt, “Rubber Modified Polymers,” in “Encyclopedia of Chemical Processing and Design,” J. J. McKetta and W. A. Cunningham, Eds., Marcel Dekker, New York, Vol. 41, 1-31 (1992).
Y. Takeda and D. R. Paul, “The Effect of Physical Interactions on Melt-Phase Homogenization of Mixtures of Polym(m-xylene adipamide) with Aliphatic Polyamides Induced by Interchange Reactions,” Polymer, 33, 3899 (1992).
J. D. Le Roux and D. R. Paul, “Preparation of Composite Membranes by a Spin Coating Process,” J. Membrane Sci., 74, 233 (1992).
K. S. Rebeiz, D. W. Fowler, and D. R. Paul, “Recycling Poly(ethylene terephthalate) in Unsaturated Polyester Composites,” ACS Symp. Ser., 513, 206 (1992).
C. K. Kim and D. R. Paul, “Miscibility of Poly(methyl methacrylate) Blends with Halogen-Containing Polycarbonates and Copolymers,” Polymer, 33, 4929 (1992).
C. K. Kim and D. R. Paul, “Interaction Parameters for Blends Containing Polycarbonates: 3. Polycarbonate Copolymers/Styrene-based Copolymers,” Polymer, 33, 4941 (1992).
P. C. Raymond, W. J. Koros, and D. R. Paul, “Comparison of Mixed and Pure Gas Permeation Characteristics for CO2 and CH4 in Copolymers and Blends containing Methyl Methacrylate Units,” J. Membrane Sci., 77, 49 (1993).
M. Aguilar-Vega, D. R. Paul, E. J. Vandenberg, and J. C. Mullis, “Gas Transport Properties of Poly(3-Hydroxyoxetane),” J. Appl. Polym. Sci., 48, 107 (1993).
M. Lu, H. Keskkula, and D. R. Paul, “Reactive Coupling of Core-Shell Impact Modifiers to Polyamide Matrices Using Styrene-Maleic Anhydride Copolymers,” Polymer, 34, 1874 (1993).
T. A. Callaghan and D. R. Paul, “Interaction Energies for Blends of Poly(methyl methacrylate), Polystyrene, and Poly(a-methylstyrene) by the Critical Molecular Weight Method,” Macromolecules, 26, 2439 (1993).
C. L. Aitken, D. R. Paul, and D. K. Mohanty, “Gas Transport Properties of Poly(arylether bissulfones)s and Poly (arylether bisketone)s,” J. Polym. Sci.: Part B: Polym. Phys., 31, 983 (1993).
M. Aguilar-Vega and D. R. Paul, “Gas Transport Properties of Poly(2,2,4,4-tetramethyl Cyclobutane Carbonate),” J. Polym. Sci.: Part B: Polym. Phys., 31, 991 (1993).
C. L. Aitken and D. R. Paul, “Gas Transport Properties of Polysulfones Based on Dihydroxynaphthalene Isomers,” J. Polym. Sci.: Part B: Polym. Phys., 31, 1061 (1993).
M. E. Stewart, S. E. George, R. L. Miller, and D. R. Paul, “Effect of Catalyst on the Reactive Processing of Polyesters with Epoxy-Functional Polymers,” Polym. Eng. Sci., 33, 675 (1993).
K. S. Rebeiz, D. W. Fowler, and D. R. Paul, “Recycling Plastics in Polymer Concrete for Construction Applications,” J. Materials in Civil Eng., 5, 237 (1993).
K. S. Rebeiz, D. W. Fowler, and D. R. Paul, “Overview of Polymer Composites Using Recycled PET,” Polym. & Polym. Compos., 1, 27 (1993).
M. Aguilar-Vega and D. R. Paul, “Gas Transport Properties of Polyphenylene Ethers,” J. Polym. Sci.: Part B: Polym. Phys., 31, 1577 (1993).
M. Aguilar-Vega and D. R. Paul, “Gas Transport Properties of Polycarbonates and Polysulfones with Aromatic Substitutions on the Bisphenol Connector Group,” J. Polym. Sci.: Part B: Polym. Phys., 31, 1599 (1993).
T. A. Callaghan, K. Takakuwa, D. R. Paul, and A. R. Padwa, “Polycarbonate-SAN Copolymer Interaction,” Polymer, 34, 3796 (1993).
K. S. Rebeiz, D. W. Fowler, and D. R. Paul, “High Performance Polymer Composites Using Recycled Plastics,” Trends in Polym. Sci., 1, 315 (1993).
D. R. Paul and Y. P. Yampol’skii, “Introduction and Perspective” Ch. 1 in “Polymeric Gas Separation Membranes,” D. R. Paul and Y. P. Yampol’skii, Eds., CRC Press, Boca Raton, FL, 1994.
M. R. Pixton and D. R. Paul, “Relationships between Structure and Transport Properties for Polymers with Aromatic Backbones” Ch. 3 in “Polymeric Gas Separation Membranes,” D. R. Paul and Y. P. Yampol’skii, Eds., CRC Press, Boca Raton, FL, 1994.
C. K. Kim and D. R. Paul, “Characterization of Ternary Blends Containing Polycarbonate, Tetramethyl Polycarbonate, and Poly(e-caprolactone),” Polym. Eng. Sci., 34, 24 (1994).
M. Lu, H. Keskkula, and D. R. Paul, “Acrylic Acid Containing Copolymers as Reactive Compatibilizers for Toughening Nylon 6,” Polym. Eng. Sci., 34, 33 (1994).
H. de los Santos Jones, Y. Liu, P. T. Inglefield, A. A. Jones, C. K. Kim, and D. R. Paul, “Coupled Relaxations in a Blend of PMMA and a Polycarbonate,” Polymer, 35, 57 (1994).
P. D. Condo, D. R. Paul, and K. P. Johnston, “Glass Transitions of Polymers with Compressed Fluid Diluents: Type II and III Behavior,” Macromolecules, 27, 365 (1994).
D. H. Weinkauf and D. R. Paul, “Gas Transport in Liquid Crystalline Polymers” in “Liquid Crystalline Polymers,” C. Carfagna, Ed., Pergamon, Oxford, 219 (1994).
D. R. Paul, “Effects of Polymer-Polymer Interactions in Multiphase Blends or Alloys,” Makromol. Chem., Macromol. Symp., 78, 83 (1994).
K. S. Rebeiz, D. W. Fowler, and D. R. Paul, “Mechanical Properties of Polymer Concrete Systems Made with Recycled Plastics,” ACI Materials J., 91, 40 (1994).
B. Majumdar, H. Keskkula, and D. R. Paul, “Morphology Development in Toughened Aliphatic Polyamides,” Polymer, 35, 1386 (1994).
B. Majumdar, H. Keskkula, and D. R. Paul, “Mechanical Behaviour and Morphology of Toughened Aliphatic Polyamides,” Polymer, 35, 1399 (1994).
P. P. Gan, D. R. Paul, and A. R. Padwa, “Phase Behaviour of Blends of Homopolymers with a-Methylstyrene/Acrylonitrile Copolymers,” Polymer, 35, 1487 (1994).
J. D. Le Roux, D. R. Paul, J. Kampa, and R. J. Lagow, “Surface Fluorination of Poly(phenylene oxide) Composite Membranes. Part I. Transport Properties,” J. Membrane Sci., 90, 21 (1994).
J. D. Le Roux, D. R. Paul, M. F. Arendt, Y. Yuan, and I. Cabasso, “Surface Fluorination of Poly(phenylene oxide) Composite Membranes. Part II. Characterization of the Fluorinated Layer,” J. Membrane Sci., 90, 37 (1994).
J. D. Le Roux, V. V. Teplyakov, and D. R. Paul, “Gas Transport Properties of Surface Fluorinated Poly(vinyltrimethylsilane) Films and Composite Membranes,” J. Membrane Sci., 90, 55 (1994).
M. E. Rezac, J. D. Le Roux, H. Chen, D. R. Paul, and W. J. Koros, “Effect of Mild Solvent Post-Treatments on the Gas Transport Properties of Glassy Polymer Membranes,” J. Membrane Sci., 90, 213 (1994).
H. Keskkula and D. R. Paul, “Toughening Agents for Engineering Polymers,” Ch. 5 in “Rubber Toughened Engineering Plastics,” A. A. Collyer, Ed., Elsevier Applied Sciences Publishers, Chapman & Hall, London (1994).
K. Takakuwa, S. Gupta, and D. R. Paul, “Miscibility of Tetramethyl-Hexafluoro Copolycarbonates with Styrene-Methyl Methacrylate Copolymers,” J. Polym. Sci.: Part B: Polym. Phys., 32, 1719 (1994).
T. A. Callaghan and D. R. Paul, “Estimation of Interaction Energies by the Critical Molecular Weight Method: 1. Blends with Polycarbonates,” J. Polym. Sci.: Part B: Polym. Phys., 32, 1813 (1994).
T. A. Callaghan and D. R. Paul, “Estimation of Interaction Energies by the Critical Molecular Weight Method: 2. Blends with Polysulfones,” J. Polym. Sci.: Part B: Polym. Phys., 32, 1847 (1994).
B. Majumdar, H. Keskkula, and D. R. Paul, “Morphology of Nylon 6/ABS Blends Compatibilized by a Styrene/Maleic Anhydride Copolymer,” Polymer, 35, 3164 (1994).
P. P. Gan, D. R. Paul, and A. R. Padwa, “Miscibility of Blends of a-Methyl Styrene/Acrylonitrile Copolymers with Styrenic Copolymers Containing Acrylonitrile or Maleic Anhydride,” Polymer, 35, 3351 (1994).
P. P. Gan and D. R. Paul, “Interaction Energies for Blends Based on Glycidyl Methacrylate Copolymers,” Polymer, 35, 3513 (1994).
D. R. Paul, “Phase Coupling and Morphology Generation in Engineering Polymer Alloys,” in Proceedings of the International Symposium on Polymer Alloys and Composites, C. L. Choy and F. G. Shin, Eds., Hong Kong Polytechnic, 21, 1994.
B. Majumdar, H. Keskkula, and D. R. Paul, “Deformation Mechanisms in Nylon 6/ABS Blends,” J. Polym. Sci.: Part B: Polym. Phys., 32, 2127 (1994).
A. J. Brady, H. Keskkula, and D. R. Paul, “Toughening of Poly(butylene terephthalate) with Core-Shell Impact Modifiers Dispersed with the Aid of Polycarbonate,” Polymer, 35, 3665 (1994).
P. P. Gan and D. R. Paul, “Phase Behavior of Blends of Styrene/Maleic Anhydride Copolymers,” J. Appl. Polym. Sci., 54, 317 (1994).
B. Majumdar, H. Keskkula, and D. R. Paul, “Effect of Extruder Type on the Properties and Morphology of Reactive Blends Based on Polyamides,” J. Appl. Polym. Sci., 54, 339 (1994).
B. Majumdar, H. Keskkula, D. R. Paul, and N. G. Harvey, “Control of the Morphology of Polyamide/Styrene-Acrylonitrile Copolymer Blends via Reactive Compatibilizers,” Polymer, 35, 4263 (1994).
J. D. Le Roux, D. R. Paul, J. Kampa, and R. J. Lagow, “Modification of Asymmetric Polysulfone Membranes by Mild Surface Fluorination. Part I. Transport Properties,” J. Membrane Sci., 94, 121 (1994).
J. D. Le Roux, D. R. Paul, M. Arendt, Y. Yuan, and I. Cabasso, “Modification of Asymmetric Polysulfone Membranes by Mild Surface Fluorination. Part II. Characterization of the Fluorinated Surface,” J. Membrane Sci., 94, 143 (1994).
B. S. Lombardo, H. Keskkula, and D. R. Paul, “Influence of ABS Type on Morphology and Mechanical Properties of PC/ABS Blends,” J. Appl. Polym. Sci., 54, 1697 (1994).
B. Majumdar, H. Keskkula, and D. R. Paul, “Mechanical Properties and Morphology of Nylon-6/Acrylonitrile-Butadiene-Styrene Blends Compatibilized with Imidized Acrylic Polymers,” Polymer, 35, 5453 (1994).
B. Majumdar, H. Keskkula, and D. R. Paul, “Effect of the Nature of the Polyamide on the Properties and Morphology of Compatibilized Nylon/Acrylonitrile-Butadiene-Styrene Blends,” Polymer, 35, 5468 (1994).
C. K. Kim, Jae-Jin Kim, and D. R. Paul, “Phase Stability of Ternary Blends,” Polym. Eng. Sci., 34, 1788 (1994).
M. R. Pixton and D. R. Paul, “Gas Transport Properties of Polyarylates. Part I: Connector and Pendant Group Effects,” J. Polym. Sci.: Part B: Polym. Phys., 33, 1135 (1995).
D. R. Paul, “Polymer-Polymer Interactions,” Pure & Appl. Chem., 67, 977 (1995).
M. R. Pixton and D. R. Paul, “Gas Transport Properties of Polyarylates. Part II: Tetrabromination of the Bisphenol,” J. Polym. Sci.: Part B: Polym. Phys., 33 1353 (1995).
P. P. Gan and D. R. Paul, “Blends of Glycidyl Methacrylate/Methyl Methacrylate Copolymers with Poly(vinylidene Fluoride),” J. Polym. Sci.: Part B: Polym. Phys., 33, 1693 (1995).
M. R. Pixton and D. R. Paul, “Gas Transport Properties of Polyarylates Based on 9,9-Bis(4-hydroxyphenyl) Anthrone,” Polymer, 36, 2745 (1995).
M. R. Pixton and D. R. Paul, “Gas Transport Properties of Adamantane-Based Polysulfones,” Polymer, 36, 3165 (1995).
A. González-Montiel, H. Keskkula, and D. R. Paul, “Morphology of Nylon 6/Polypropylene Blends Compatibilized with Maleated Polypropylene,” J. Polym. Sci.: Part B: Polym. Phys., 33, 1751 (1995).
M. Lu, H. Keskkula, and D. R. Paul, “Toughening of Nylon 6 with Grafted Rubber Impact Modifiers,” J. Appl. Polym. Sci., 58, 1175 (1995).
H. Keskkula, and D. R. Paul, “Toughened Nylons,” Ch. 11.6 in “Nylon Plastics Handbook,” Melvin I. Kohan, Ed., Hanser Publishers, Munich (1995).
M. R. Pixton and D. R. Paul, “Gas Transport Properties of Polyarylates: Substituent Size and Symmetry Effects,” Macromolecules, 28, 8277 (1995).
A. González-Montiel, H. Keskkula, and D. R. Paul, “Impact-Modified Nylon 6/Polypropylene Blends: 1. Morphology-Property Relationships,” Polymer, 36, 4587 (1995).
A. González-Montiel, H. Keskkula, and D. R. Paul, “Impact Modified Nylon 6/Polypropylene Blends: 2. Effect of Reactive Functionality on Morphology and Mechanical Properties,” Polymer, 36, 4605 (1995).
A. González-Montiel, H. Keskkula, and D. R. Paul, “Impact Modified Nylon 6/Polypropylene Blends: 3. Deformation Mechanisms,” Polymer, 36, 4621 (1995).
M. Lu and D. R. Paul, “Thermodynamics of Solubilization of Functional Copolymers in the Grafted Shell of Core-Shell Impact Modifiers: 1. Theory,” Polymer, 37, 115 (1996).
M. Lu, H. Keskkula, and D. R. Paul, “Thermodynamics of Solubilization of Functional Copolymers in the Grafted Shell of Core-Shell Impact Modifiers: 2. Experimental,” Polymer, 37, 125 (1996).
M. Lu, H. Keskkula, and D. R. Paul, “Toughening of Nylon 6 with Core-Shell Impact Modifiers: Effect of Matrix Molecular Weight,” J. Appl. Polym. Sci., 59, 1467 (1996).
J. Y. Park, D. R. Paul, I. Haider, and M. Jaffe, “Effect of Thermal Annealing on the Gas Permeability of HIQ-40 Films,” J. Polym. Sci.: Part B: Polym. Phys., 34, 1741 (1996).
A. J. Oshinski, H. Keskkula, and D. R. Paul, “The Effect of Polyamide End-Group Configuration on Morphology and Toughness of Blends with Maleated Elastomers,” J. Appl. Polym. Sci., 61, 623 (1996).
H. Keskkula, D. R. Paul, and J. W. Barlow, “Polymer Blends,” Kirk-Othmer Encyclopedia of Chemical Technology, 4th Edition, John Wiley & Sons, Vol. 19, 837 (1996).
K. A. Schult and D. R. Paul, “Techniques for Measurement of Water Vapor Sorption and Permeation in Polymer Films,” J. Appl. Polym. Sci., 61, 1865 (1996).
A. J. Oshinski, H. Keskkula, and D. R. Paul, “The Role of Matrix Molecular Weight in Rubber Toughened Nylon 6 Blends: Part 1 - Morphology,” Polymer, 37, 4891 (1996).
A. J. Oshinski, H. Keskkula, and D. R. Paul, “The Role of Matrix Molecular Weight in Rubber Toughened Nylon 6 Blends: Part 2 - Room Temperature Izod Impact Toughness,” Polymer, 37, 4909 (1996).
A. J. Oshinski, H. Keskkula, and D. R. Paul, “The Role of Matrix Molecular Weight in Rubber Toughened Nylon 6 Blends: Part 3 - Ductile-Brittle Transition Temperature,” Polymer, 37, 4919 (1996).
Y. Kayano, H. Keskkula, and D. R. Paul, “Effect of Polycarbonate Molecular Weight and Processing Conditions on Mechanical Behavior of Blends with Core-Shell Modifiers,” Polymer, 37, 4505 (1996).
D. R. Paul, “Polymer Blends Containing Styrene/Hydrogenated Butadiene Block Copolymers: Solubilization and Compatibilization” Ch. 15C in “Thermoplastic Elastomers: A Comprehensive Review, 2nd Edition,” G. Holden, N. R. Legge, R. Quirk, and H. Schroeder, Eds., Hanser Publishers, Munich, 1996.
K. A. Schult and D. R. Paul, “Water Sorption and Transport in a Series of Polysulfones,” J. Polym. Sci.: Part B: Polym. Phys., 34, 2805 (1996).
S. Ziaee and D. R. Paul, “Polymer-Polymer Interactions Via Analog Calorimetry. 1 - Blends of Polystyrene with Poly(2,6-dimethyl-1,4-phenylene oxide),” J. Polym. Sci.: Part B: Polym. Phys., 34, 2641 (1996).
S. Ziaee and D. R. Paul, “Polymer-Polymer Interactions Via Analog Calorimetry. 2 - Blends of Polystyrene with Bisphenol-A Polycarbonate and Tetramethyl Bisphenol-A Polycarbonate),” J. Polym. Sci.: Part B: Polym. Phys., 35, 489 (1997).
C. T. Wright and D. R. Paul, “Gas Sorption and Transport in UV-Irradiated Polyarylate Copolymers Based on Tetramethyl Bisphenol-A and Dihydroxybenzophenone,” J. Membrane Sci., 124, 161 (1997).
J. Y. Park and D. R. Paul, “Correlation and Prediction of Gas Permeability in Glassy Polymer Membrane Materials via a Modified Free Volume Based Group Contribution Method,” J. Membrane Sci., 125, 23 (1997).
K. A. Schult and D. R. Paul, “Water Sorption and Transport in Blends of Poly(vinyl pyrrolidone) and Polysulfone,” J. Polym. Sci.: Part B: Polym. Phys., 35, 655 (1997).
B. Majumdar, D. R. Paul, and A. J. Oshinski, “Evolution of Morphology in Compatibilized Versus Uncompatibilized Polyamide Blends,” Polymer, 38, 1787 (1997).
C. T. Wright and D. R. Paul, “Gas Sorption and Transport in Poly(tertiary-butyl methacrylate),” Polymer, 38, 1871 (1997).
Y. Kayano, H. Keskkula, and D. R. Paul, “Evaluation of the Fracture Behavior of Nylon 6/SEBS-g-MA Blends,” Polymer, 38, 1885 (1997).
S. Ziaee and D. R. Paul, “Polymer-Polymer Interactions Via Analog Calorimetry. 3 - Interactions between Styrene and Acrylonitrile Repeat Units,” J. Polym. Sci.: Part B: Polym. Phys., 35, 831 (1997).
K. A. Schult and D. R. Paul, “Water Sorption and Transport in Blends of Polyethyloxazoline and Polyethersulfone,” J. Polym. Sci.: Part B: Polym. Phys., 35, 993 (1997).
E. Hage, W. Hale, H. Keskkula, and D. R. Paul, “Impact Modification of Poly(butylene terephthalate) by ABS Materials,” Polymer, 38, 3237 (1997).
C. T. Wright and D. R. Paul, “Feasibility of Thermal Crosslinking of Polyarylate Gas-Separation Membranes Using Benzocyclobutene-Based Monomers,” J. Membrane Sci., 129, 47 (1997).
D. R. Paul and M. R. Pixton, “Polyarylate Gas Separation Membranes,” Makromol. Chem. and Phys.: Macromol. Symp., 118, 401 (1997).
F. A. Ruiz-Treviño and D. R. Paul, “Modification of Polysulfone Gas Separation Membranes by Additives,” J. Appl. Polym. Sci., 66, 1925 (1997).
Y. Kayano, H. Keskkula, and D. R. Paul, “Fracture Behavior of Polycarbonate Blends with a Core-Shell Impact Modifier,” Polymer, 39, 821 (1998).
C. T. Wright and D. R. Paul, “Gas Sorption and Transport in UV-Irradiated Poly(2,6-dimethyl-1,4-phenylene oxide) Films,” J. Appl. Polym. Sci., 67, 875 (1998).
G. Merfeld and D. R. Paul, “Binary Interaction Parameters from Blends of SMA Copolymers with TMPC-PC Copolycarbonates,” Polymer, 39, 1999 (1998).
F. A. Ruiz-Trevino and D. R. Paul, “Gas Permselectivity Properties of High Free Volume Polymers Modified by a Low Molecular Weight Additive,” J. Appl. Polym. Sci., 68, 403 (1998).
F. A. Ruiz-Trevino and D. R. Paul, “A Quantitative Model for the Specific Volume of Polymer-Diluent Mixtures in the Glassy State,” J. Polym. Sci: Part B: Polym. Phys., 36, 1037 (1998).
R. A. Kudva, H. Keskkula, and D. R. Paul, “Compatibilization of Nylon 6/ABS Blends Using Glycidyl Methacrylate/Methyl Methacrylate Copolymers,” Polymer, 39, 2447 (1998).
Y. Kayano, H. Keskkula, and D. R. Paul, “Fracture Behavior of Some Rubber Toughened Nylon 6 Blends,” Polymer, 39, 2835 (1998).
G. D. Merfeld, A. Karim, B. Majumdar, S. K. Satija, and D. R. Paul, “Interfacial Thickness in Bilayers of Poly(phenylene oxide) and Styrenic Copolymers,” J. Polym. Sci.: Part B: Polym. Phys., 36, 3115 (1998).
W. Hale, H. Keskkula, and D. R. Paul, “Compatibilization of PBT/ABS Blends Using Glycidyl Methacrylate/Methyl Methacrylate Terpolymers,” Polymer, 40, 365 (1999).
G. Wildes, H. Keskkula, and D. R. Paul, “Morphology of PC/SAN Blends: Effect of Reactive Compatibilization, SAN Concentration, Processing and Viscosity Ratio,” J. Polym. Sci.: Part B: Polym. Phys., 37, 71 (1999).
T-S Chung, J-J Shieh, W. W. Y. Lau, M. P. Srinivasan, and D. R. Paul, “Fabrication of Multi-Layer Composite Hollow Fiber Membranes for Gas Separation,” J. Membrane Sci., 152, 211 (1999).
J. H. Chu and D. R. Paul, “Interaction Energies for Blends of SAN with Methyl Methacrylate Copolymers with Ethyl Acrylate and n-Butyl Acrylate,” Polymer, 40, 2687 (1999).
O. Okada, H. Keskkula, and D. R. Paul, “Nylon 6 as a Modifier for Maleated Ethylene-Propylene Elastomers,” Polymer, 40, 2699 (1999).
G. Merfeld, K. Chan, and D. R. Paul, “Blends Based on Copolymers of Methyl Methacrylate with Phenyl Maleimide and Tribromophenyl Maleimide,” Macromolecules, 32, 429 (1999).
G. S. Wildes, T. Harada, H. Keskkula, D. R. Paul, V. Janarthanan, and A. R. Padwa, “Synthesis and Characterization of an Amine functional SAN for the Compatibilization of PC/ABS Blends,” Polymer, 40, 3069 (1999).
J.-J. Shieh, T.-S. Chung, and D. R. Paul, “Study On Multi-Layer Composite Hollow Fiber Membranes For Gas Separation,” Chem. Engr. Sci., 54, 675 (1999).
W. Hale, H. Keskkula, and D. R. Paul, “Fracture Behavior of PBT/ABS Blends Compatibilized by Methyl Methacrylate-Glycidyl Methacrylate-Ethyl Acrylate Terpolymers,” Polymer, 40, 3353 (1999).
M. S. McCaig, E. D. Seo, and D. R. Paul, “Effects of Bromine Substitution on the Physical and Gas Transport Properties of Five Series of Glassy Polymers,” Polymer, 40, 3367 (1999).
W. Hale, J. H. Lee, H. Keskkula, and D. R. Paul, “Effect of PBT Melt Viscosity on the Morphology and Mechanical Properties of Compatibilized and Uncompatibilized Blends with ABS,” Polymer, 40, 3621 (1999).
W. Hale, H. Keskkula, and D. R. Paul, “Effect of Crosslinking Reactions and Order of Mixing on Properties of Compatibilized PBT/ABS Blends,” Polymer, 40, 3665 (1999).
T. Harada, E. Carone, R. Kudva, H. Keskkula, and D. R. Paul, “Effect of Adding an Imidized Acrylic Polymer to Super Tough Nylon 6 on Stiffness and Toughness,” Polymer, 40, 3957 (1999).
W. R. Hale, L.A. Pessan, H. Keskkula, and D. R. Paul, “Effect of Compatibilization and ABS Type on Properties of PBT/ABS Blends,” Polymer, 40, 4237 (1999).
G. Wildes, H. Keskkula, and D. R. Paul, “Coalescence in PC/SAN Blends: Effect of Reactive Compatibilization and Matrix Phase Viscosity,” Polymer, 40, 5609 (1999).
R. A. Kudva, H. Keskkula, and D. R. Paul, “Morphology and Mechanical Properties of Compatibilized Nylon 6 / Polyethylene Blends,” Polymer, 40, 6003 (1999).
D. R. Paul, “Water Vapor Sorption and Diffusion in Glassy Polymers,” Macromol. Symp., 138, 13 (1999).
H. A. Stretz, P. E. Cassidy, and D. R. Paul, “Blends of Bisphenol A Polycarbonate and Rubber-Toughened Styrene-Maleic Anhydride Copolymers,” J. Appl. Polym. Sci., 74, 1508 (1999).
G. Wildes, H. Keskkula, and D. R. Paul, “Fracture Characterization of PC/ABS Blends: Effect of Reactive Compatibilization, ABS Type and Rubber Concentration,” Polymer, 40, 7089 (1999).
M. S. McCaig and D. R. Paul, “Effect of UV Crosslinking and Physical Aging on the Gas Permeability of Thin Glassy Polyarylate Films,” Polymer, 40, 7209 (1999).

R. A. Kudva, H. Keskkula, and D. R. Paul, “Properties of Compatibilized Nylon 6/ABS Blends: Part 1: Effect of ABS Type, Polymer, 41, 225 (2000).
R. A. Kudva, H. Keskkula, and D. R. Paul, “Properties of Compatibilized Nylon 6/ABS Blends: Part II: Effects of Compatibilizer Type and Processing History.” Polymer, 41, 239 (2000).
R. A. Kudva, H. Keskkula, and D. R. Paul, “Fracture Behavior of Nylon 6/ABS Blends Compatibilized with an Imidized Acrylic Polymer,” Polymer, 41, 335 (2000).
M. S. McCaig and D. R. Paul, “Effect of Film Thickness on the Changes in Gas Permeability of a Glassy Polyarylate Due to Physical Aging: Part I. Experimental Observations,” Polymer, 41, 629 (2000).
M. S. McCaig, D. R. Paul, and J. W. Barlow, “Effect of Film Thickness on the Changes in Gas Permeability of a Glassy Polyarylate Due to Physical Aging: Part II. Mathematical Model,” Polymer, 41, 639 (2000).
G. D. Merfeld and D. R. Paul, “Light Scattering Characterization of Tetramethyl Polycarbonate Blends with Polystyrene and with Styrene-Pentabromobenzyl Acrylate Copolymers,” Polymer, 41, 649 (2000).
G. D. Merfeld, T. T. Maa, K. Chan, and D. R. Paul, “Synthesis and Blends of Pentabromobenzyl Acrylate Copolymers,” Polymer, 41, 663 (2000).
D. R. Paul and C. B. Bucknall, Chapter 1, “Introduction,” Polymer Blends Volume 1: Formulation, Edited by D. R. Paul and C. B. Bucknall, John Wiley and Sons, Inc., 2000.
G. D. Merfeld and D. R. Paul, Chapter 3, “Polymer-Polymer Interactions Based on Mean Field Approximations,” Polymer Blends Volume 1: Formulation, Edited by D. R. Paul and C. B. Bucknall, John Wiley and Sons, Inc., 2000.
B. Majumdar and D. R. Paul, Chapter 17, “Reactive Compatibilization,” Polymer Blends Volume 1: Formulation, Edited by D. R. Paul and C. B. Bucknall, John Wiley and Sons, Inc., 2000.
J. H. Chu, H.K. Tilakaratne, and D. R. Paul, “Blends of Tribromostyrene Copolymers,” Polymer, 41, 5393 (2000).
L. Rios-Guerrero, H. Keskkula, and D. R. Paul, “Deformation Processes in High Impact Polystyrene as Revealed By Analysis Of Arrested Cracks,” Polymer, 41, 5415 (2000).
D. M. Laura, H. Keskkula, J. W. Barlow, and D. R. Paul, “Effect of Glass Fiber and Ethylene-Propylene Rubber Content on Tensile and Impact Properties of Nylon 6,” Polymer, 41, 7165 (2000).
J. Chu and D. R. Paul, “Blends Of SAN With Methyl Methacrylate Copolymers of 2-Hydroxyethyl Methacrylate and 4-Methacryloxyethyl Trimellitic Anhydride,” Polymer 41, 7193 (2000).
Z. Mogri and D. R. Paul, “Membrane Formation Techniques for Gas Permeation Measurements for Side-Chain Crystalline Polymers,” J. Membrane Sci., 175, 253 (2000).
N. Kitayama, H. Keskkula, and D. R. Paul, “Reactive Compatibilization of Nylon 6/Styrene-Acrylonitrile Copolymer Blends: Part 1: Phase Inversion Behavior,” Polymer, 41, 8041 (2000).
N. Kitayama, H. Keskkula, and D. R. Paul, “Reactive Compatibilization of Nylon 6/Styrene-Acrylonitrile Copolymer Blends: Part 2: Dispersed Phase Particle Size,” Polymer, 41, 8053 (2000).
O. Okada, H. Keskkula, and D. R. Paul, “Fracture Toughness of Nylon 6 with Maleated Ethylene/Propylene Rubbers,” Polymer, 41, 8061 (2000).
G. D. Merfeld and D. R. Paul, "Thermodynamic Characterization of Polymer-Polymer Interfaces,” Macromol. Symp., 159, 105 (2000).
J. W. Cho and D. R. Paul, "Nylon 6 Nanocomposites by Melt Compounding,” Polymer, 42, 1083 (2001).
Z. Mogri and D. R. Paul, "Gas Sorption and Transport in Side-chain Crystalline and Molten Poly (octyldecyl acrylate),” Polymer, 42, 2531 (2001).
T. G. Pressly, H. Keskkula, and D. R. Paul, “Temperature Dependence of the Fracture Behavior of Nylon 6/ABS Blends,” Polymer, 42, 3043 (2001).
N. Kitayama, H. Keskkula, and D. R. Paul, "Reactive Compatibilization of Nylon 6/Styrene-Acrylonitrile Copolymer Blends: Part 3. Tensile Stress-Strain Behavior,” Polymer, 42, 3751 (2001).
H. R. Dennis, D. L. Hunter, D. Chang, S. Kim, J. L. White, J. W. Cho, and D. R. Paul, "Nanocomposites: The Importance of Processing," Plastics Engineering, 57, 56 (2001).
A. J. Kelkar and D. R. Paul, “Water Vapor Transport in a Series of Polyarylates,” J. Membrane Sci., 181, 199 (2001).
J. W. Cho and D. R. Paul, "Glass Fiber Reinforced Polyamide Composites Toughened with ABS and EPR-g-MA,” J. Appl. Polym. Sci., 80, 484 (2001).
J. J. Shieh, T. S. Chung, R. Wang, M. P. Srinivasan, and D. R. Paul, "Gas Separation Performance of Poly (4-vinylpyridine)/Polyetherimide Composite Hollow Fibers,” J. Membrane Sci., 182, 111 (2001).
Z. Mogri and D. R. Paul, “Water-Vapor Permeation in Semicrystalline and Molten Poly(octadecyl acrylate),” J. Polym. Sci. Part B: Polym Phys., 39, 979 (2001).
D. M. Laura, H. Keskkula, J. W. Barlow, and D. R. Paul, “Effect of Glass Fiber and Maleated Ethylene-Propylene Rubber Content on the Impact Fracture Parameters of Nylon 6,” Polymer, 42, 6161 (2001).
Z. Mogri and D. R. Paul, “Gas Sorption and Transport in Poly(alkyl (meth)acrylate)s. Part I. Permeation Properties,” Polymer, 42, 7765 (2001).
Z. Mogri and D. R. Paul, “Gas Sorption and Transport in Poly(alkyl (meth)acrylate)s. Part II. Sorption and Diffusion Properties,” Polymer, 42, 7781 (2001).
O. Okada, H. Keskkula, and D. R. Paul, “Mechanical Properties of Blends of Maleated Ethylene-Propylene Rubber and Nylon 6,” Polymer, 42, 8715 (2001).
H. R. Dennis, D. L. Hunter, D. Chang, S. Kim, J. L. White, J. W. Cho, and D. R. Paul, “Effect of Melt Processing Conditions on the Extent of Exfoliation in Organoclay-Based Nanocomposites,” Polymer, 42, 9513 (2001).
T. D. Fornes, P. J. Yoon, H. Keskkula, and D. R. Paul, “Nylon 6 Nanocomposites: The Effect of Matrix Molecular Weight,” Polymer, 42, 9929 (2001). (Erratum, Polymer 43, 2121 (2002))
S. Matsui and D. R. Paul, “Pervaporation Separation of Aromatic/Aliphatic Hydrocarbons by Crosslinked Poly(methyl acrylate-co-acrylic acid) Membranes,” J. Membrane Sci., 195, 229 (2002).
S. Zhu and D. R. Paul, “Evaluation of the Binary Interaction Energy Density Between Styrene and Acrylonitrile Units and its Temperature Dependence,” Macromolecules, 35, 2078 (2002).
P. Pötschke, T. D. Fornes, and D. R. Paul, “Rheological Behavior of Multiwalled Carbon Nanotube/Polycarbonate Composites,” Polymer, 43, 3247 (2002).
K. W. Haggard and D. R. Paul, “Phase Behavior of Blends of High Temperature Copolycarbonates with Styrene/Acrylonitrile Copolymers,” Polymer, 43, 3727 (2002).
D. M. Laura, H. Keskkula, J. W. Barlow, and D. R. Paul, “Effect of Glass Fiber Surface Chemistry on the Mechanical Properties of Glass Fiber Reinforced, Rubber-Toughened Nylon 6,” Polymer, 43, 4673 (2002).
T. D. Fornes, P. J. Yoon, D. L. Hunter, H. Keskkula, and D. R. Paul, “Effect of Organoclay Structure on Nylon 6 Nanocomposite Morphology and Properties,” Polymer, 43, 5915 (2002).
S. Zhu and D. R. Paul, “Binary Interaction Energy Densities for Blends of Styrene/Acrylonitrile Copolymers with Methyl Methacrylate/n-alkyl Acrylate Copolymers,” Macromolecules, 35, 8227 (2002).
D. R. Paul and R. Clarke, “Modeling of Modified Atmosphere Packaging Based on Designs with a Membrane and Perforations,” J. Membrane Sci., 208, 269 (2002).
P. J. Yoon, T. D. Fornes, and D. R. Paul, “Thermal Expansion Behavior of Nylon 6 Nanocomposites,” Polymer, 43, 6727 (2002).
J. D. Wind, C. Staudt-Bickel, D. R. Paul, and W. J. Koros, “The Effects of Crosslinking Chemistry on CO2 Plasticization of Polyimide Gas Separation Membranes,” Ind. Eng. Chem. Res., 41, 6139 (2002).
S. Matsui and D. R. Paul, “Pervaporation Separation of Aromatic/Aliphatic Hydrocarbons by a Series of Ionically Crosslinked Poly(n-alkyl acrylate) Membranes,” J. Membrane Sci, 213, 67 (2003).
A. Taubert, J. D. Wind, D. R. Paul, W. J. Koros, and K. I. Winey, “Novel Polyimide Ionomers: CO2 Plasticization, Morphology, and Ion Distribution,” Polymer, 44, 1881 (2003).
P. Pötschke and D. R Paul, “Formation of Co-Continuous Structures in Melt-Mixed Immiscible Polymer Blends,” J. Macromol. Sci., Part C, Polymer Reviews 43, 87 (2003).
S. Zhu and D. R. Paul, “Re-examination of the Miscibility Behavior of SMMA Copolymers Using Various Techniques,” Polymer, 44, 3009 (2003).
S. Srinivas, P. Brant, Y. Huang, and D. R. Paul, “Structure and Properties of Oriented Polyethylene Films,” Polym. Eng. Sci., 43, 831 (2003).
J. D. Wind, C. Staudt-Bickel, D. R. Paul, and W. J. Koros, “Solid-State Covalent Cross-linking of Polyimide Membranes for Carbon Dioxide Plasticization Reduction,” Macromolecules, 36, 1882 (2003).
D. M. Laura, H. Keskkula, J. W. Barlow, and D. R. Paul, “Effect of Rubber Particle Size and Rubber Type on the Mechanical Properties of Glass Fiber Reinforced, Rubber-Toughened Nylon 6,” Polymer, 44, 3347 (2003).
T. D. Fornes and D. R. Paul, “Crystallization Behavior of Nylon 6 Nanocomposites,” Polymer 44, 3945 (2003).
S. Zhu and D. R. Paul, “Evaluation of the Styrene/n-Butyl Methacrylate Binary Interaction Energy Density,” Polymer, 44, 3963 (2003).
T. D. Fornes and D. R. Paul, “Modeling Properties of Nylon 6/Clay Nanocomposites Using Composite Theories,” Polymer, 44, 4993 (2003).
W. Xu, D. R. Paul, and W. J. Koros, “Carboxylic Acid Containing Polyimides for Pervaporation Separations of Toluene/Iso-Octane Mixtures,” J. Membrane Sci., 219, 89 (2003).
P. J. Yoon, D. L. Hunter, and D. R. Paul, “Polycarbonate Nanocomposites: 1. Effect of Organoclay Structure on Morphology and Properties,” Polymer, 44, 5323 (2003).
P. J. Yoon, D. L. Hunter, and D. R. Paul, “Polycarbonate Nanocomposites: 2. Degradation and Color Formation,” Polymer, 44, 5341 (2003).
S. Zhu and D. R. Paul, “Correlation of Binary Interaction Energies for Polymer Repeat Unit Pairs via Connectivity Indices,” Polymer, 44, 5671 (2003).
P. Pötschke and D. R Paul, “Detection of Co-Continuous Structures in SAN/PA6 Blends by Different Methods,” Macromol. Symp., 198, 69 (2003).
T. D. Fornes, P. J. Yoon, and D. R. Paul, “Polymer Matrix Degradation and Color Formation in Melt Processed Nylon 6-Clay Nanocomposites,” Polymer, 44, 7545 (2003).
T. D. Fornes and D. R. Paul, “Formation and Properties of Nylon 6 Nanocomposites,” Polimeros: Ciencia e Tecnologia, 13, 212 (2003).
J. D. Wind, S. M. Sirard, D. R. Paul, P. F. Green, K. P. Johnston, and W. J. Koros, “Carbon Dioxide-Induced Plasticization of Polyimide Membranes: Pseudo-Equilibrium Relationships Between Diffusion, Sorption, and Swelling,” Macromolecules, 36, 6433 (2003).
J. D. Wind, S. M. Sirard, D. R. Paul, P. F. Green, K. P. Johnston, and W. J. Koros, “Relaxation Dynamics of CO2 Diffusion, Sorption, and Polymer Swelling for Plasticized Polyimide Membranes,” Macromolecules, 36, 6442 (2003).
K. W. Haggard and D. R. Paul, “Blends of High Temperature Copolycarbonates with Bisphenol-A-Polycarbonate and a Copolyester,” Polymer, 45, 2313 (2004).
J. D. Wind, D. R. Paul, and W. J. Koros, “Natural Gas Permeation in Polyimide Membranes,” J. Membrane Sci., 228, 227 (2004).
T. D. Fornes, D. L. Hunter, and D. R. Paul, “Effect of Sodium Montmorillonite Source on Nylon 6/Clay Nanocomposites,” Polymer, 45, 2321 (2004).
T. D. Fornes, D. L. Hunter, and D. R. Paul, “Nylon 6 Nanocomposites from Alkylammonium-Modified Clay: The Role of Alkyl Tails on Exfoliation,” Macromolecules 37, 1793 (2004).
R. K. Shah and D. R. Paul, “Nylon 6 Nanocomposites Prepared by a Melt Mixing Masterbatch Process,” Polymer 45, 2991 (2004).
S. Matsui and D. R. Paul, “A Simple Model for Pervaporative Transport of Binary Mixtures through Rubbery Polymeric Membranes,” J. Membrane Sci., 235, 25 (2004).
O. Okada, H. Keskkula, and D. R. Paul, “Fracture Toughness of Nylon 6 Blends with Maleated Rubbers,” J. Polymer Sci.: Part B: Polym. Phys., 42, 1739 (2004).
J. J. Huang, H. Keskkula, and D. R. Paul, “Rubber Toughening of an Amorphous Polyamide by Functionalized SEBS Copolymers: Morphology and Izod Impact Behavior,” Polymer, 45, 4203 (2004).
D. R. Paul, “Reformulation of the Solution-Diffusion Theory of Reverse Osmosis,” J. Membrane Sci., 241, 371 (2004).
K. O’Leary and D. R. Paul, “Copolymers of Poly(n-alkyl Acrylates): Synthesis, Characterization, and Monomer Reactivity Ratios,” Polymer, 45, 6575 (2004).
S. Bourbigot, D. L. Vanderhart, J. W. Gilman, S. Bellayer, H. Stretz, and D. R. Paul, “Solid State NMR Characterization and Flammability of Styrene-Acrylonitrile Copolymer Montmorillonite Nanocomposite,” Polymer, 45, 7627 (2004).
S. Hotta and D. R. Paul, “Nanocomposites Formed from Linear Low Density Polyethylene and Organoclays,” Polymer, 45, 7639 (2004).
T. D. Fornes and D. R. Paul, “Structure and Properties of Nanocomposites Based on Nylon-11 and -12 as Compared with Those Based on Nylon-6,” Macromolecules, 37, 7698 (2004).
Y. Huang and D. R. Paul, “Experimental Methods for Tracking Physical Aging of Thin Glassy Polymer Films by Gas Permeation,” J. Membrane Sci., 244, 167 (2004).
Y. Huang and D. R. Paul, “Physical Aging of Thin Glassy Polymer Films Monitored by Gas Permeability,” Polymer, 45, 8377 (2004).
F. Chavarria and D. R. Paul, “Comparison of Nanocomposites Based on Nylon 6 and Nylon 66,” Polymer, 45, 8501 (2004).
D. R. Paul, “High Performance Engineering Thermoplastics via Reactive Compatibilization,” in Modification and Blending of Synthetic and Natural Macromolecules, F. Ciardelli and S. Penczek, Eds., Kluwer, Netherlands, 293, 2004.
H. A. Stretz, D. R. Paul, R. Li, H. Keskkula, and P. E. Cassidy, “Intercalation and Exfoliation Relationships in Melt-processed Poly(styrene-co-acrylonitrile)/Montmorillonite Nanocomposites,” Polymer, 46, 2621 (2005).
R. K. Shah, D. L. Hunter, and D. R. Paul, “Nanocomposites from Poly(ethylene-co-methacrylic acid) Ionomers: Effect of Surfactant Structure on Morphology and Properties,” Polymer, 46, 2646 (2005).
H. A. Stretz, D. R. Paul, and P. E. Cassidy, “Poly(styrene-co-acrylonitrile)/Montmorillonite Organoclay Mixtures: A Model System for ABS Nanocomposites,” Polymer, 46, 3818 (2005).
Q. H. Zeng, A. B. Yu, G. Q. (Max) Lu, and D. R. Paul, “Clay-Based Polymer Nanocomposites: Research and Commercial Development,” J. Nanosci. Nanotech., 5, 1574 (2005).
K. Y. Lee and D. R. Paul, “A Model for Composites Containing Three-Dimensional Ellipsoidal Inclusions,” Polymer, 46, 9064 (2005).
D. R. Paul, Q. H. Zeng, A. B. Yu, and G. Q. Lu, “The Interlayer Swelling and Molecular Packing in Organoclays,” J. Colloid and Interface Sci., 292, 462 (2005).
H.-S. Lee, P. D. Fasulo, W. R. Rodgers, and D. R. Paul, “TPO Based Nanocomposites. Part 1. Morphology and Mechanical Properties,” Polymer, 46, 11673 (2005).
Y. Huang and D. R. Paul, “Effect of Temperature on Physical Aging of Thin Glassy Polymer Films,” Macromolecules, 38, 10148 (2005).
J. J. Huang, H. Keskkula, and D. R. Paul, “Elastomer Particle Morphology in Ternary Blends of Maleated and Non-maleated Ethylene-based Elastomers with Polyamides: Role of Elastomer Phase Miscibility,” Polymer, 47, 624 (2006).
J. J. Huang, H. Keskkula, and D. R. Paul, “Comparison of Toughening Behavior of Nylon 6 versus an Amorphous Polyamide Using Various Maleated Elastomers,” Polymer, 47, 639 (2006).
K. A. O’Leary and D. R. Paul, “Physical Properties of Poly(n-alkyl acrylate) Copolymers. Part 1. Crystalline/Crystalline Combinations,” Polymer, 47, 1226 (2006).
K. A. O’Leary and D. R. Paul, “Physical Properties of Poly(n-alkyl acrylate) Copolymers. Part 2. Crystalline/Non-crystalline Combinations,” Polymer, 47, 1245 (2006).
Y. Huang and D. R. Paul, “Physical Aging of Thin Glassy Polymer Films Monitored by Optical Properties,” Macromolecules, 39, 1554 (2006).
Y-C. Ahn and D. R. Paul, “Rubber Toughening of Nylon 6 Nanocomposites,” Polymer, 47, 2830 (2006).
R. K. Shah and D. R. Paul, “Comparison of Nanocomposites Prepared from Sodium, Zinc, and Lithium Ionomers of Ethylene/Methacrylic Acid Copolymers,” Macromolecules, 39, 3327 (2006).
S. Takahashi, H. A. Goldberg, C. A. Feeney, D. P. Karim, M. Farrell, K. O’Leary, and D. R. Paul, “Gas Barrier Properties of Butyl Rubber/Vermiculite Nanocomposite Coatings,” Polymer, 47, 3083 (2006).
J. H. Kim, W. J. Koros, and D. R. Paul, “Physical Aging of Thin 6FDA-based Polyimide Membranes Containing Carboxyl Acid Groups. Part I. Transport Properties,” Polymer, 47, 3094 (2006).
J. H. Kim, W. J. Koros, and D. R. Paul, “Physical Aging of Thin 6FDA-based Polyimide Membranes Containing Carboxyl Acid Groups. Part II. Optical Properties,” Polymer, 47, 3104 (2006).
J. J. Huang and D. R. Paul, “Comparison of Fracture Behavior of Nylon 6 versus an Amorphous Polyamide Toughened with Maleated Poly(ethylene-1-octene) Elastomers,” Polymer, 47, 3505 (2006).
H.-S. Lee, P. D. Fasulo, W. R. Rodgers, and D. R. Paul, “TPO based Nanocomposites, Part 2. Thermal Expansion Behavior,” Polymer, 47, 3528 (2006).
Y. Huang, X. Wang, and D. R. Paul, “Physical Aging of Thin Glassy Polymer Films: Free Volume Interpretations,” J. Membrane Sci., 277, 219 (2006).
R. K. Shah, and D. R. Paul, “Organoclay Degradation in Melt Processed Polyethylene Nanocomposites,” Polymer, 47, 4075 (2006).
R. K. Shah, R. K. Krishnaswamy, S. Takahashi, and D. R. Paul, “Blown Films of Nanocomposites Prepared from Low Density Polyethylene and a Sodium Ionomer of Poly(ethylene-co-methacrylic acid),” Polymer. 47, 6187 (2006).
J. H. Kim, W. J. Koros, and D. R. Paul, “Effects of CO2 Exposure and Physical Aging on the Gas Permeability of Thin 6FDA-based Polyimide Membranes. Part 1. Without Crosslinking,” J. Membrane Sci., 282, 21 (2006).
J. H. Kim, W. J. Koros, and D. R. Paul, “Effects of CO2 Exposure and Physical Aging on the Gas Permeability of Thin 6FDA-based Polyimide Membranes. Part 2. With Crosslinking,” J. Membrane Sci., 282, 32 (2006).
S. Takahashi and D. R. Paul, “Gas Permeation in Poly(etherimide) Nanocomposite Membranes Based on Surface-treated Silica. Part 1: Without Chemical Coupling to Matrix,” Polymer, 47, 7519 (2006).
S. Takahashi and D. R. Paul, “Gas Permeation in Poly(etherimide) Nanocomposite Membranes Based on Surface-treated Silica. Part 2: With Chemical Coupling to Matrix,” Polymer, 47, 7535 (2006).
F. Chavarria and D. R. Paul, “Morphology and Properties of Thermoplastic Polyurethane Nanocomposites: Effect of Organoclay Structure,” Polymer, 47, 7760 (2006).
H. A. Stretz and D. R. Paul, “ Properties and Morphology of Nanocomposites Based on Styrenic Polymers. Part I. Styrene-acrylonitrile Copolymers,” Polymer, 47, 8123 (2006).
H. A. Stretz and D. R. Paul, “ Properties and Morphology of Nanocomposites Based on Styrenic Polymers. Part II: Effects of Maleic Anhydride Units,” Polymer, 47, 8527 (2006).
R. K. Shah, L. Cui, K. L. Williams, B. Bauman, and D. R. Paul, “Nanocomposites from Fluoro-oxygenated Polyethylene: A Novel Route to Organoclay Exfoliation,” J. Appl. Polym Sci., 102, 2980 (2006).
R. K. Shah, D. H. Kim, and D. R. Paul, “Morphology and Properties of Nanocomposites Formed from Ethylene/Methacrylic Acid Copolymers and Organoclays,” Polymer, 48, 1047 (2007).
Y. Huang and D. R. Paul, “Effect of Film Thickness on the Gas-Permeation Characteristics of Glassy Polymer Membranes,” Ind. Eng. Chem. Res. 46, 2342 (2007).
L. Cui and D. R. Paul, “Evaluation of Amine Functionalized Polypropylenes as Compatibilizers for Polypropylene Nanocomposites,” Polymer, 48, 1632 (2007).
B. W. Rowe, B. D. Freeman, and D. R. Paul, “Effect of Sorbed Water and Temperature on the Optical Properties and Density of Thin Glassy Polymer Films on a Silicon Substrate,” Macromolecules, 40, 2806 (2007).
D. L. Hunter, K. W. Kamena, and D. R. Paul, “Processing and Properties of Polymers Modified by Clays,” MRS Bulletin, 32, 323 (2007).
Y. Huang and D. R. Paul, “Effect of Molecular Weight and Temperature on Physical Aging of Thin Glassy Poly(2,6-dimethyl-1,4-phenylene oxide) Films.” J. Polym. Sci.: Part B: Polym Phys., 45, 1390 (2007).
F. Chavarria, K. Nairn, P. White, A. J. Hill, D. L. Hunter, and D. R. Paul, “Morphology and Properties of Nanocomposites from Organoclays with Reduced Cation Exchange Capacity,” J. Appl. Polym. Sci., 105, 2910 (2007).
J. M. Cervantes-Uc, J. V. Cauich-Rodríguez, H. Vázquez-Torres, L. F. Garfias-Mesías, and D. R. Paul, “Thermal Degradation of Commercially Available Organoclays Studied by TGA-FTIR,” Thermochimica Acta, 457, 92 (2007).
K. Y. Lee, K. H. Kim, S. K. Jeoung, S. I. Ju, J. H. Shim, N. H. Kim, S. G. Lee, S. M. Lee, J. K. Lee, and D. R. Paul, “Thermal Expansion Behavior of Composites,” Polymer, 48, 4174 (2007).
Y. Yoo, R. K. Shah, and D. R. Paul, “Fracture Behavior of Nanocomposites Based on Poly(ethylene-co-methacrylic acid) Ionomers,” Polymer, 48, 4867 (2007).
D. H. Kim, P. D. Fasulo, W. R. Rodgers, and D. R. Paul, “Structure and Properties of Polypropylene-based Nanocomposites: Effect of PP-g-MA to Organoclay Ratio,” Polymer, 48, 5308 (2007).
D. H. Kim, P. D. Fasulo, W. R. Rodgers, and D. R. Paul, “Effect of the Ratio of Maleated Polypropylene to Organoclay on the Structure and Properties of TPO-based Nanocomposites. Part I: Morphology and Mechanical Properties,” Polymer, 48, 5960 (2007).
L. Cui, X. Ma, and D. R. Paul, “Morphology and Properties of Nanocomposites Formed from Ethylene-Vinyl Acetate Copolymers and Organoclays,” Polymer, 48, 6325 (2007).
F. Chavarria, R. K. Shah, D. L. Hunter, and D. R. Paul, “Effect of Melt Processing Conditions on the Morphology and Properties of Nylon 6 Nanocomposites,” Polym. Eng. Sci. 47, 1847 (2007).
R. D. Raharjo, B. D. Freeman, D. R. Paul, and E. S. Sanders, “Pure and Mixed Gas CH4 and n-C4H10 Permeability and Diffusivity in Poly(1-trimethylsilyl-1-propyne),” Polymer, 48, 7329 (2007).
R. D. Raharjo, B. D. Freeman, D. R. Paul, G. C. Sarti and E. S. Sanders, “Pure and Mixed Gas CH4 and n-C4H10 Permeability and Diffusivity in Poly(dimethylsiloxane),” J. Membrane Sci., 306, 75 (2007).
B. S. Kirkland and D. R. Paul, “Gas Transport in Poly(n-alkyl acrylate)/Poly(m-alkyl acrylate) Blends,” Polymer, 49, 507 (2008).
K. Y. Lee, S. R. Hong, S. K. Jeoung, N. H. Kim, S. G. Lee and D. R. Paul, “Thermal Expansion Behavior of Composites Based on Non-Axisymmetric Ellipsoidal Particles,” Polymer, 49, 2146 (2008).
D. H. Kim, P. D. Fasulo, W. R. Rodgers, and D. R. Paul, “Effect of the Ratio of Maleated Polypropylene to Organoclay on the Structure and Properties of TPO-based Nanocomposites. Part II: Thermal Expansion Behavior,” Polymer, 49, 2492 (2008).
S. D. Kelman, B. W. Rowe, C. W. Bielawski, S. J. Pas, A. J. Hill, D. R. Paul, and B. D. Freeman, “Crosslinking poly[1-(trimethylsilyl)-1-propyne] and its Effect on Physical Stability,” J. Membrane Sci., 320, 123 (2008).
D. R. Paul and L. M. Robeson, “Polymer Nanotechnology: Nanocomposites,” Polymer, 49, 3187 (2008).
L. Cui, D. M. Khramov, C. W. Bielawski, D. L. Hunter, P. J. Yoon, and D. R. Paul, “Effect of Organoclay Purity and Degradation on Nanocomposite Performance. Part 1: Surfactant Degradation,” Polymer 49, 3751 (2008).
L. Cui, D. L. Hunter, P. J. Yoon, and D. R. Paul, “Effect of Organoclay Purity and Degradation on Nanocomposite Performance. Part 2: Morphology and Properties of Nanocomposites,” Polymer 49, 3762 (2008).
Y. Yoo and D. R. Paul, “Effect of Organoclay Structure on Morphology and Properties of Nanocomposites Based on an Amorphous Polyamide,” Polymer, 49, 3795 (2008).
B. S. Kirkland, R. Clarke, D. R. Paul, “A Versatile Membrane System for Bulk Storage and Shipping of Produce in a Modified Atmosphere,” J. Membrane Sci. 324, 119 (2008).